Trickflow has issued an advertisement within race pages about their race 195 heads ontop of a big bore 3.700 4.6l achieving 518hp! I tried to copy/paste, save, everything but take a pic.....hmmm, hang on.
Tfs 195 heads 518hp!
- Thread starter 96blak54
- Start date
OP
OP
g36 monkey
Post Whore
Pretty flat torque curve too
DropTopPony
Post Whore
This gives me a boner 
DropTopPony
Post Whore
With Nates 2V N/A thread in the 2V section it had me thinking about selling my blower and doing an NA build.
The only thing I would have to swap would be my pistons since I have a 23cc dish set now. Going with a 5.0 big bore on my Teksid topped off with my TFS 185's and custom cams should get me 350rwhp rather easily. That is plenty for a cruiser.
The only thing I would have to swap would be my pistons since I have a 23cc dish set now. Going with a 5.0 big bore on my Teksid topped off with my TFS 185's and custom cams should get me 350rwhp rather easily. That is plenty for a cruiser.
McCloud
Active Member
That's a pretty similar torque curve to my dyno numbers. Peak torque was at 4700-5k with peak hp around 6k and staying flat to 6500. I really regret going too low on my c/r. Instead of 9.0 I should have went around 9.7-9.8:1 to give me more bottom end.
OP
OP
Its a cool set up!
Droptop, their was a local guy running 38cc heads on a npi shortblock with a proproducts intake manifold dyno'd at Blankenship 408rwhp. $3000 for 350rwhp would anger me.
Droptop, their was a local guy running 38cc heads on a npi shortblock with a proproducts intake manifold dyno'd at Blankenship 408rwhp. $3000 for 350rwhp would anger me.
JerZeyStangz
Well-Known Member
WOW!
DropTopPony
Post Whore
Just buy the 195's Nate.
chris91
Well-Known Member
Good lord! Someone want to buy some Fox Lake Stage 2 heads and Hitech Cams? Haha
OP
OP
We should all keep in mind that the 5.4l engine has potential as well!
