Reply to thread

Message: <blockquote data-quote="OnyxCobra" data-source="post: 689179" data-attributes="member: 8293">It's going to be spraying into the discharge manifold of the blower. The blower is already drilled there for the meth so instead of making another hole in it somewhere else I'm going to be using that location. It should work out pretty well, they say you can run it through the blower to help cool it but like i said it's already drilled just after the blower.I also relocated my IAT sensor to my lower intake manifold so it'll be getting an accurate reading of the air temperature, since the stock location would be giving a reading WAY off since the blower will be heating the air so much.</blockquote>