Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1488331" data-attributes="member: 11896">I can't explain to you happiness I felt when I got the new tps (after a week of tps jokes) and it actually worked.  If it didn't the neighbors would have been scared with the cursing that would have come from my garage.  But after that I got to installing my newest addition from killerglass.com.  [MEDIA=youtube]pKHpLnF6Y9Y[/MEDIA]This was the first start so there was a LOT of air inside.  I got out my zero fill funnel and hooked it up and let it run for 20 mins and was still surprised to be seeing some air, but not much.  Then as soon as I turned the motor off the killerglass pipe would drain completely.  I started it up again and got a bunch more out but to where it looked clean but when I turned the motor off there was still a good bubble in the pipe.  I did it a third time and got it down to this point.<img src="https://i.imgur.com/7wHDm2F.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />I finally relented and dropped the back down to the ground and left the front up in the air and it cleared it.  I had been having some temp issues after it ran for a long time, now I know why.  The last time to get that last bubble out it would only open the thermostat a little before it was cooling itself enough, never got over 190.  <img src="https://i.imgur.com/bAfxMjF.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />So then I got cray cray and took the jackstands out of the front.  It looks and sounds different with the wheels on the ground for the first time in months.  Its time to see if the t56 rolls nice shortly....</blockquote>