Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1547801" data-attributes="member: 11896">well enough tears, time to get back into it.  I got a little frustrated after the fire, then I had some personal health issues that just brought everything to a stop.  It took about 6 months till I started to get a handle on them, then my mom takes a fall and needs extra help.  While dad and I are taking care of her suddenly we discover he has A-fib(heart shit) and he was in the hospital 2 times while they evaluated if he needed a pacemaker.  He got away with a change of meds, and about the time he and mom is getting better the dog trips going up the basement stairs(completely unfinished raw wood) and after hearing what sounded like a drum going down the stairs I looked down to see him going head over tail tumbling down.  We thought he was going to need surgery but he was also able to avoid the knife and has now healed.[ATTACH=full]36379[/ATTACH]So during this time I have not touched the car, the laser, the cnc as it has just been one thing after another leading to this.[ATTACH=full]36380[/ATTACH]I started by cleaning the garage and was amazed that I found all my 10mm bits!  Swept booth under the car, and underneath the bottom of the car to get the webs out of it and today I finally slid under it for the first time(just in time for the heatwave to hit us).  I thought I had finished all the wiring under it and was happy to see that it looks like I did.  I did find that there was a small burn hole in the airline for the drivers front airbag but I happened to have found 12 foot of 1/4" hose the day before so I started with that today.  The air ride controller is on the top of this pic, I think I am going to make a custom plate for it...[ATTACH=full]36381[/ATTACH]but after about 90 mins I was hot as heck, and I spent the last 30 mins leaning over to work on this area behind the drivers seat.  I have two discs in my lower back that are compressed and because of this I can't work leaning over like that for long.  I am going to try and do a little here and there each day.</blockquote>