Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1470726" data-attributes="member: 11896"><p>If your in cali and need to pass inspection and I am pretty sure any err light will signal a fail if I am not mistaken even if the bulb is pulled(then you get a really nice beeping noise when you start the car for 30 secs).  I am not sure what your  talking about with a volt meter in the video but I have to admit I am not investing 15 mins in figuring out how to read the codes again to fix your car(That's your job).  I thought all I did when I was looking was ground a wire, turn the key and count the flashes at least in the 2 mins I watched that is what he showed.  Replacing all 4 sensors with out running the diagnostic is just an expensive and stupid test as again there are about a dozen err's for the system with the sensors only being one.  But what ever, pull the bulb put some tape over it I mean what good is abs(this is where our race experts will tell you they yanked it and never missed it) but I am out.  I tried to help and do it right.  Good luck</p></blockquote><p></p>