Throttle Position Sensor Problems

[Christian Eggert]

I am throwing tps codes so i changed the tps i'm about 99% sure i did it right and i cleared the codes. Anyways i'm still having the same problems and the codes came back. Was i supposed to do something else? Any help is appreciated

 

[white95]

Check the harness connector and see if it needs to be cleaned. It's also possible you bought a new but defective sensor.

 

[ttocs]

I had the exact same problem last year. It was mainly after the motor warmed up that it would get loose and start to lose connection. I swapped out the harness and could tell immediately that it had been WAY too loose for a while.