Reply to thread

Message: <blockquote data-quote="mineralgreygt" data-source="post: 1447056" data-attributes="member: 19635"><p>I was looking at the Torsen T2R Maximum Motorsports offers with a 4:1 torque bias. I called them at maximum and gave them a run down of my setup, I have coilovers up front but not in the rear, the only concern they seem to have was I was going to get a lot more body roll in the rear due to the extra grip so they recommended a beefier sway bar. I asked about launching and they said they wouldn't recommend drag racing with slicks on it but they have done many 0-60 times on their track car with no issues. I did a lot of searching and I have not seen anyone report one broken yet, MM also said the same. This is pretty much my race/street car, I like to do Auto X and Circle track stuff with it, soon road courses. I am pretty happy with my 3.55s I just figured since I am in there might as well replace all the bearings and seals. I just bought a fresh set of 315s vs my current 295s and see how it goes.</p></blockquote><p></p>