Reply to thread

Message: <blockquote data-quote="97stanger" data-source="post: 792356" data-attributes="member: 8229"><p>Well, called bullet racing today and spoke w/ them about what they feel about the situation. Right off the bat he said those VT stage 3 blower cams are rediculously too large for a 281 mod motor in a build like mine. He suggested a 220/230 duration, 531/577 lift, 114lsa custom grind cam, after comparing these cams around they seem to almost be identical to VT's stage 2 blower grinds. And, I got super lucky and am sending my VT stage 3 blower grinds to bullet and they are going to grind me the custom grinds and send the custom grinds to me. So i wont have to touch valves/pistons at all! Just a little down time, but it will be the right cam for the setup.</p></blockquote><p></p>