Vortech V3 Si trim install -- How do I bend this A/C line?

[BigSkySN95]

That A/C line is a pain! How did you guys bend yours? Also, it seems like it will be touching the CCRM by the time it clears the blower.

 

[lswht]

For my turbo kit i just took the clamp off and did it by hand slowly

Sent from my SM-G900P using Tapatalk

 

[ttocs]

is it the stock condenser? Have you tried a tubing bender?

 

[BigSkySN95]

Aftermarket condenser, I broke the OEM on the first attempt to bend this line. Right now I have the line disconnected

 

[BigSkySN95]

I bought a tubing Bender but it wasn't large enough for that line

 

[1bad95]

I couldnt figure out on the instructions how it was to be bent. I was able to bend mine enough carefully with some channel locks to get mine together and just enough room for my 90* off the blower

Sent from my XT1585 using Tapatalk

 

[ttocs]

there are a couple of different types of tubing benders. You can borrow/rent them at autozone.

 

[BigSkySN95]

Thanks! I'll check at autozone

 

[Wild Horses]

I broke mine at the "T" where the sensor goes in. Have mine disconnected as well. Luckily those lines are pretty cheap and easy to acquire. I think we're talking the same line...