Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1000910" data-attributes="member: 11896">it could be the motor or the switch which is more then likely if it will not roll down the pass window. The switches work in a master/slave operation so if the master(drivers switch) dies the slave will/can keep working. Pull the door pull/switches out and test the contacts on the back. If I remember correctly the pin in the middle should have +12v switched on it and then when you push the switch it sends it out on one of the other 2 or 4 wires(I think its 4).I actually have that pulled out on my car right now.  If you want to test it on yours we can confirm what should be going on and what you have.</blockquote>