3 inch seamless/tipless IRS catback

[Burninrock24]

Looking for an IRS catback exhaust that is a full 3" from end to end. The remaining 3" exhausts I find have an exhaust tip that would normally be hidden by the New Edge bumpers, but would be seen on a 94-98 SN95. I am looking for the pipes to look completely seamless.

Any examples out there?

It looks like Dynomax used to make one, but I can't find it anywhere. I've attached a picture of the dynomax exhaust.

 

[TrickVert]

My first question on this is why you need 3" exhaust. Are you pushing 800+ HP? I've seen cars running in the 9's with 2.5" duals.

 

[RAU03MACH]

I dont think I ever seen 3 inch on newer mustangs
But I have had 3 inch on my old big blocks
My 92 mustang with a 70 460 interceptor c6 tranny , had 3 inch exhaust all the way from headers

 

[Burninrock24]

My first question on this is why you need 3" exhaust

https://www.bbkperformance.com/mustang-5-0-coyote-catted-swap-x-pipe-87-04.html

The BBK Coyote swap headers and mid pipe collect into 3” pipes. And I don’t like seeing the tail pipe diameter change halfway through the bumper line like in the attached photo

 

[RAU03MACH]

Thats another thing keeping the system, the same size front to back

 

[white95]

Why not just buy the least expensive one, cut the tips off and replace the with what you want?

 

[Burninrock24]

Why not just buy the least expensive one, cut the tips off and replace the with what you want?

It’s not out of the question, I’m just trying to see if I can source something out of the box is all

 

[lwarrior1016]

@Burninrock24 i don’t know if you’ll find one for a reasonable price. I’ve been looking for the same thing. You might end up having to get someone to build you a custom setup.