4R70W issue after adjustment

[MadStang]

Hey JR.

Two weeks ago I started my auto-tko swap. I was halted by the driveshaft bolts being over torqued.

We got the shifter and all electronical connections unplugged and dismounted from the car before we realized this and tried to put the auto back together.

Now, after I tried starting my car after the header install. I realized the car will not start in park (it shorts itself out from starting) and the car only starts in neutral. And the car does not recognize drive any more.

I have all gears when the car is started up except drive. 1-2-R-P are all able to be used.

The wiring that is still disconnected is the o/d wiring, the shifter lock mechanism to stop the car from being started in anything but park or neutral. and two plugs inside the rear of the console that I don't know what plug into them

The shifter cable was loosened when we were going to uninstall everything. Could that be the issue also? It's finding every gear fine except for drive.

Please let me know asap, the car needs to be up and running by friday. Thanks

 

[MadStang]

problem solved. Just needed to adjust the shift linkage which was either than I thought haha.