87 rods and crank

[Corndiddly]

I have a 1987 roller short block, and I was wondering if those rods and cranks will fit into my 94 block. I know that crank and rods are good and I have yet to check out the ones in the 94 block.

Thanks

 

[Magic]

Yes, they'll work.

 

[Corndiddly]

Thank you

 

[whiplash473]

2nd opinion - yes they'll work


Sent from bored/stroked iPhone

 

[BlkoutGT]

Just curious here... why would you use the fox rods and crank and not the pistons? 87-92 had forged pistons.

 

[Corndiddly]

Not a fan of putting used pistons into a different block and a couple of the pistons have some damage on the side

 

[Hoseitdown]

Good eye.....

 

[whiplash473]

Not a fan of putting used pistons into a different block and a couple of the pistons have some damage on the side

make sure you go through the rods carefully..i'd use an indicator and check for stretch after you inspect them

 

[Corndiddly]

make sure you go through the rods carefully..i'd use an indicator and check for stretch after you inspect them

Do you happen to know the proper length?

 

[whiplash473]

not right now but i'm going outside to work on the car in a little bit so i'll post it here

 

[Corndiddly]

Thanks

 

[whiplash473]

don't know off hand..it slipped my mind that my new rods are different because of the stroker now..and i had a couple slightly stretched rods before so i can't give you an exact length

 

[Corndiddly]

Alright I'll just have to do some research