Rebuild for 1995 302

[Jay95]

Hello all,
I have a 1995 cobra svt. I am looking into purchasing an internally lubricated supercharger for it. It has 94,000 miles with minor modifications. I want to remove engine and have block checked along with cylinder heads. When this is completed what would be my do’s and don’t’s of upgrading the rods , crank and pistons.

 

[95opal]

Hello all,
I have a 1995 cobra svt. I am looking into purchasing an internally lubricated supercharger for it. It has 94,000 miles with minor modifications. I want to remove engine and have block checked along with cylinder heads. When this is completed what would be my do’s and don’t’s of upgrading the rods , crank and pistons.

Unless you have issues currently i see no need to pull the motor.
If anything id look at a blower friendly cam to add to what you have. A set of 42# injectors and either a chip and dyno tune, or a standalone if your up to it. If your still running stock exhaust and headers id look into upgrading that. Other than that slap the blower on and be done.

 

[Jay95]

Unless you have issues currently i see no need to pull the motor.
If anything id look at a blower friendly cam to add to what you have. A set of 42# injectors and either a chip and dyno tune, or a standalone if your up to it. If your still running stock exhaust and headers id look into upgrading that. Other than that slap the blower on and be done.

 

[Jay95]

Perfect thank you for the very helpful info.