94/95 Paxton Novi 2000
- Thread starter sorscode
- Start date
2002BLGT
Active Member
Not running one personally but have installed and tuned a handful , do you have a specific question ?
I was curious what people with the 94/95s are doing for Power Pipes and Bypass Valves. Back when I ran one in 2000 the market had things and today it looks like I need to go to a museum to find the parts. I know Paxton didn't make the kit long. Luckily I never got rid of mine. I'm putting it back on this winter but I'm now regretting sell my powerpipe and race valve. I know i have my Cog setup somewhere, but worse case I'm sure I can use the Vortech Crank Cog Setup and buy a Cog for the blower.
Seems like the 94/95 Crowd went either Procharger/Vortech or maybe PowerDyne if they didn't go Turbo. Was also curious to see who all out there had one on the 94/95.
ttocs
Forum's #1 poster
powerdynes kit was not out all that long although I don't think it was because of any specific problems. I found a vortech V3 for a nice price and polished and installed it.
I am running the power pipe and I actually made the pipe between the vortech and the upper with the bypass valve on it. I think it was a 3.5" pipe with a 30 degree bend to start with that I cut to fit and then had someone weld the bypass valve to it.
I am running the power pipe and I actually made the pipe between the vortech and the upper with the bypass valve on it. I think it was a 3.5" pipe with a 30 degree bend to start with that I cut to fit and then had someone weld the bypass valve to it.
Yeah, I have a feeling I’ll need to fab mine. One big difference between the Paxton and Vortech is Alternator location. Paxton relocates the alternator down below.
Last edited:
Rons95GT
Not a new member
- Joined
- Aug 4, 2020
- Messages
- 80
- Reaction score
- 49
I have a Novi 2000 on my 95’. I still have the kit as it came from Paxton though. Running 10-11 lbs. boost.
Nice! Mind sharing some photos and your setup? 10-11 lbs sounds good with the stock setup.
Rons95GT
Not a new member
- Joined
- Aug 4, 2020
- Messages
- 80
- Reaction score
- 49
Sure, sorry for the late reply.
HOw were you able to put your alternator up to?powerdynes kit was not out all that long although I don't think it was because of any specific problems. I found a vortech V3 for a nice price and polished and installed it.
I am running the power pipe and I actually made the pipe between the vortech and the upper with the bypass valve on it. I think it was a 3.5" pipe with a 30 degree bend to start with that I cut to fit and then had someone weld the bypass valve to it.
HOw wee you able to run the alternator up top? Also are you on fb and/or IG. I'd love to see more pics of the car. I just put a Vortech on my 94 and gonna put one on the 95 331 build currently doing.powerdynes kit was not out all that long although I don't think it was because of any specific problems. I found a vortech V3 for a nice price and polished and installed it.
I am running the power pipe and I actually made the pipe between the vortech and the upper with the bypass valve on it. I think it was a 3.5" pipe with a 30 degree bend to start with that I cut to fit and then had someone weld the bypass valve to it.
