94gt 5.0 bellhousing question

[MustangBrad94gt]

I have just bought a 94gt, 5.0 5 speed, some one has put a t-5 part # 1352-162 in the car, this is out of a 87-88, 2.3 fox body, they didn't change the pilot bearing to the .590 the 2.3 has, so theirs a vibe that starts about 80mph, their is a .440 difference in the input shaft length, the fox t-5 is 7.410, the sn95 is 7.850, im going to put a sn-95 t-5 back in, but i dont know what bellhousing is on the car now, does anybody know a face to face measurement on the sn95 bellhousing, could they have just swapped the fox t-5 into my car and left the sn-95 bellhousing, will the difference in inputshaft length let u do this?

 

[Willautoy]

94/95 5.0 bellhousings are 5/8 inch longer than fox

 

[Addermk2]

*cough* 11/16" *cough*

 

[MustangBrad94gt]

I need the face to face demensions of fox bellhousing & same for sn95 94-95 bellhousing, I'm trying to figure out what the previous owner has done, so i know what direction to go in, I appreciate any help I can get with these measurements, thanks again

 

[Willautoy]

Yeah yeah TY adder :thumb: