Reply to thread

Message: <blockquote data-quote="94turbostang" data-source="post: 800646" data-attributes="member: 11143">so i just bought an afm pms kit and have it hooked up and working properly for everything except for one part. since my motor build the car idles around 650rpm. much to low for my tastes as the car loads up on fuel,chugs, then dies periodically at idle. now i tried going into the idle control menu to raise my idle. here is how it is setup:-idle control menu--rpm 850timing +6 degreesair +4start fuel -2-tp setupidle setup .8vWOT set 4.5verror 10%here is the scenario, i turn idle control on, and no matter what the rpm is, it automatically jumps it to around 1800rpm. ultimately, i would like it to idle between 800-1000rpm, but no matter what i change in the idle setup menu, it doesnt change, and when i turn the idle control option on, it revs to 1800 regardless of the value rpm. is there something im missing here or an option i havent discovered?im sorry if this thread is noobish, but the last thing i want to is go changing things without having a damn clue of what im doing, and this seemed to be the easiest way to get an answer. bryce</blockquote>