Any paint/body guys?

[wnracing]

I've got a buddy that has a Termi rear bumper cover that he has replaced. The old one has a bit of a crack in it, but it looks repairable. There are a lot of "plastic welders" out on the market now and some crazy expensive "plastic bumper repair kits" out there as well, but is all of this really necessary? I mean it seems to me that a good fiberglass patch on the back side + a sandable epoxy of some sort on the front would work or am I just missing something? What is used in most cases to fill/shave letters on these things?

It seems like some of these companies are overcomplicating this in order to make a buck... Am I wrong?

Any input would be seriously appreciated.. I'm gonna try my hand at fixing this thing because a free Termi bumper is FTW!

 

[CC'S95GT]

don't use fiberglass resin. It gets too hard and wil crack out of the urethane bumper cover.
sand off all of the paint in the area
v out the cracks and spread your epoxy resin uver the v'd areas.
sand smooth and cover with an epoxy primer
Paint as usual

 

[wnracing]

What kind of epoxy do you use?