CobraSound
New Member
- Joined
- Dec 31, 2020
- Messages
- 17
- Reaction score
- 24
I contacted Bigdogs inquiring about the porting he does. It shows great reviews with lots of data to back it up.
Im considering doing a stage 2 intake and head combo with a Steeda 19 or B31 cam. Something that will still drive nice but put down a solid 350rwhp with supporting mods.
Bigdogs ported GT40 flow numbers
LIFT IN EXH
.100 82 65
.200 146 118
.300 191 144
.400 225 160
.500 232 177
.600 234 182
No too bad for an old head if you ask me. Should drive really well and be easy to tune while putting an SN95 solidly in the 12's. The draw back is I cannot use the heads on my 363, but the intake is usable. Im probably better of doing a blower and swapping that over later.
Has anyone had any work done by them? I'd like to hear your experiences.
Im considering doing a stage 2 intake and head combo with a Steeda 19 or B31 cam. Something that will still drive nice but put down a solid 350rwhp with supporting mods.
Bigdogs ported GT40 flow numbers
LIFT IN EXH
.100 82 65
.200 146 118
.300 191 144
.400 225 160
.500 232 177
.600 234 182
No too bad for an old head if you ask me. Should drive really well and be easy to tune while putting an SN95 solidly in the 12's. The draw back is I cannot use the heads on my 363, but the intake is usable. Im probably better of doing a blower and swapping that over later.
Has anyone had any work done by them? I'd like to hear your experiences.