Cam questions...HELP!

[ninjaplease!]

Alright, So we have my NPI motor tore down to where I just need to pull the heads and swap them. Upon looking at the cams, they arent marked. How can I tell what one goes where?

The cams are Comp 270s. I noticed the back of the cams have divots in them, and they are different sizes. I looked at the cam card and they dont have individual specs for each cam.

Any insight?

Thanks

Bob

 

[duff daddy]

Do they have any markings on them on the front where teh cam gears go or in the middle by the hex? My Bullit Racing Cams were noted.

 

[Lee12609]

i'm confused? they should be 2 identical camshafts, put them on whichever side you want, degree them and lock em down.

 

[duff daddy]

Yea your right Lee, I was thinking 4v I/E but yea my Bullets did have a marking on them.

 

[Chances50]

should be identical like said above.

 

[ninjaplease!]

Cool. I thought that, but I wasnt sure. I didnt want to get it all back together and have to tear it all down again.