Cams/stall

[97stanger]

hey guys, well i was originally going to go with crower stage 2 cams/springs but i talked to Tim from MPH and he does do non pi grinds, which i was originally going to go with but i thought he only made pi grinds. Sooo, to make a long story short I will be going with custom grind MPH non pi s/c cams and springs. Only other modification i plan to do other than the cams is a BC-auto stall. So, my question is, do i get the stall first, or the cams??

 

[MustangMatt96GT]

Stall

 

[Steven]

being that you have a blower it wont really matter to be honest.. not to me and i have a auto. I'd slap go with whatever you want first.. just as long as you do them both eventually.. even without the stall but with the cams, you'd be alright, though slightly sluggish in the lower rpms.. just depends on what you want to deal with first

 

[DropTopPony]

I'd do the cams first, then get retuned and send your Dyno sheet to BC and let them choose what stall best fits your setup....thats what i am going to do.

 

[jfor441]

Droptop is right.

 

[97stanger]

okay thanks for the help, thats what ill be doing then!

 

[bigjohnson4.6gt]

I'd do the cams first, then get retuned and send your Dyno sheet to BC and let them choose what stall best fits your setup....thats what i am going to do.

word