Clutch gurus!!!!in here please

[stang4u2nv]

hey guys whats up im gonna replace my flywheel next weekend because the teeth broke off so now my starter slips....long story short i'm replacing it ..... i have a stage 3+ kustom clutch from promotion powertrain in fort lauderdale FL and it's been on the car for about a year and a half and it has performed beautifully but since i'm replacing the flywheel i don't want to use the same clutch disc with a new flywheel. I'm thinking of replacing the whole thing with something stronger because while on the bottle and the mickey's in the back the clutch does not engage as hard as when its on motor...this clutch i have supports around 450-500hp or so they say and i believe it but i think my torque numbers are higher than that around 600ft/lb of torque.....what is kind of clutch will i be able to use best? mcleoud, ram, centerforce or what.....remember i have stock gears 3.08 so there is a lot of pressure on the clutch.....the tranny is built by promotion as well with a pro/Gforce kit.....any ideas?

 

[P.S.I.cho]

your clutch should be grabbing even with the bottle, i run a king cobra with 582 rwhp and it grabs off the line, so a 500 hp clutch should work just fine i would think, but in the event that its not or you just want the upgrade i like the Spec, and centerforce clutches thats just me

 

[ryclef331]

I run a clutchmasters stage 3 with my g-force and it has NEVER slipped....

See the times in my sig. 1.56 60ft spraying out of the hole....

 

[94kingcbra]

I as well run a Clutchmasters Stage 3, and it's also never slipped. I don't have nitrous but I have a pretty strong stroker motor and this clutch holds way better that my old zoom stage 3 and it's way smoother and easier to drive on the street.