Differential cover question
- Thread starter abgray56
- Start date
Thats a great question! I do have an aluminum 8.8 cover that i snagged from an awd independant rear exploder. I had to mill off a few components, but was a cheap upgraded cover. It is thicker than the metal cover too. I can see where clearance would be an issue and im sorry I am no help, but we got some mad genious mustang folk here. Hang on and someone will reply.
badass98svt
Legend
- Joined
- Jan 11, 2006
- Messages
- 5,032
- Reaction score
- 2,929
I'm almost positive that 05+ diff covers are slightly more shallow. So any company's 05+ covers should fit. I have a LPW and it clears. The LPW Ultra is a low profile cover.
Last edited:
+1 for the LPW cover
If you can get a measurement for the Ford part, I’ll post one up of mine to compare.
garrittpwl
Active Member
coil overs in stock shock locations? brave soul.
Where else would I put them
There is a project on the board to strengthen that aspect of the chassis.
garrittpwl
Active Member
Stifflers has a new (not on their website yet) option that relocates the shock mount inside the frame rail but I don't think it'll clear a phbWhere else would I put them
There is a project on the board to strengthen that aspect of the chassis.
Fits in my ‘95 coupe, along with the MM Panhard bar, torque arm, sway bar and adjustable LCA’s. Just have to drop 2 bolts on the sway bar to do rear gear oil swaps, which aren’t very frequent.
Last edited:
Interesting. I may or may not switch to an IRS at some point. Haven’t decided.
shovel
Active Member
- Joined
- Jan 4, 2023
- Messages
- 575
- Reaction score
- 544
Do those girdled covers have any real utility on stock-ish horsepower? Seems like most of the diff covers which aren't just a stamping also include the bearing cap girdles but I always wonder if it's solving a problem that doesn't exist outside of huge power and competitive racing.
cobrajeff96
Well-Known Member
You're right. Don't bother unless you've got something like 600 to the ground. The 8.8 SRA itself will hold just fine and some people have pushed them farther than even that with very little work to it, if any at all. That's why they're still so sought after today as well as the Ford 9". So good that LS, Mopar, and even import owners buy them.
It came with the rear end that I bought. I have been thinking about swapping it out for the finned, 13/14 GT500 version. Mainly for heat dissipation.
badass98svt
Legend
- Joined
- Jan 11, 2006
- Messages
- 5,032
- Reaction score
- 2,929
Anyone see the new Banks "ram air" differential cover?
How long til that design trickles down to the 8.8s
How long til that design trickles down to the 8.8s
