Emblem help..

[Sn95Willis]

Ok guys on my 02 GT I switched the horse out with the ford oval.. Now for the life of me I can find where I got it from... I am also trying to find the 4.6 fender emblems. The only ones i have been able to find have High perforemnce, nitrous or supercharged under it.. Post you emblems to if you have a pic of them..

 

[eliyarbrough]

5.0resto has a bunch:
http://www.latemodelrestoration.com/products/Mustang-Emblems-And-Badges

MustangsUnlimited has them also:
http://www.mustangsunlimited.com/SubCat.asp?CatKey=74-01&SubCategory=Emblems&category=Exterior+Trim&KeyWords=LMC10

Also AutoBadges has them:
http://www.autobadges.com/emblems/

You should find exactly what you are looking for out of these links, I hope.

Here are the ones I had made by AutoBadges for mine:

For my next ones, I'm going to have them make me some 5.0 Emblems with my 1STOF3 on it.

 

[96StangGT]

Keep the pony :crybaby2: !!! It's so much better lookin than the ford oval, idk the ford oval dont look right in the front grill imo

 

[eliyarbrough]

I took my pony out off of mine quite a while ago. I am so looking forward to getting that back, though.

 

[Sn95Willis]

I agree now with the Ford oval on the Sn95 car... For some reason it doesnt look as good as it did on my 02.. But also here is a pic of the badges I want.. and my 02..

 

[ARdoller]

can you just trim off the block under the 4.6? like get the 4.6 Supercharged badge and snip off the "Supercharged" part?

 

[Sn95Willis]

I might end up trying that...

 

[Sn95Willis]

Looks like I am going to order these and try to trim the botom off.. And also going to paint my Horse black..

[attachment deleted by admin]

 

[jc95gt]

lol before you order them...ur gonna have to keep some of the bottom molding otherwise the (dot) in 4 point 6 is gonna fall off lol

just a heads up

but u could just glue them in place where u want them

 

[Sn95Willis]

Or put a lil peice of 3m on the back... I think it will work out..

 

[jc95gt]

hopefully you can line it up perfectly straight

 

[BigTang]

like this?

http://www.yearone.com/serverfiles/fbshopmain2.asp?hid=F20AF1748

 

[Sn95Willis]

Yea BigTang those are like what I wanted to.. But if I can get those other to work with out the bottom part they go with my scheme.... Well I just ordered them anyway..

 

[94darkhorse]

Just throw a turbo on there so you don't have to change a brand new badge.

 

[BigTang]

Yea BigTang those are like what I wanted to.. But if I can get those other to work with out the bottom part they go with my scheme.... Well I just ordered them anyway..

before you cut the bottom off of them put a piece of masking tape on the front to secure them in place to keep the spacing right. then i would buy the 3m emblem adhesive tape or which is a super sticky thin double sided tape that will do what you want

 

[EastBayStang98]

late model redto has the ones you want, if i were you id just but them and paint them black