Reply to thread

Message: <blockquote data-quote="Chenn2389" data-source="post: 1486321" data-attributes="member: 25873"><p>The plug is wired correctly. I even cut out the new pigtail and soldered it a second time because my initial thought was I had to have done something wrong. like I said I triple checked the pig tail wiring it is not wrong. I even used the wires in the old burned pigtail as a guide on the second time to make sure the color coded wires are correct, they are. The pig tail is not the issue. Perhaps both switches I tried are also bad right out of the box, but unlikely.</p></blockquote><p></p>