fixn to buy intake..

white98gt · Oct 22, 2007

found a company on ebay called custommustang.com that has a pi intake kit for 285.00 + 25.00 shipping. has the gaskets, coolant tube, etc. even the aluminum crossover has the second hole drilled out for the other sensor. thinkin about getting it. what can i expect from this pi intake? obviously some power, but does the exhaust sound different? heard a few say it does. any thoughts?

MustangMatt96GT · Oct 22, 2007

yea it will be quiteer at idle and just scream at WOT compaired to the NPI

white98gt · Oct 22, 2007

MustangMatt96GT said:
yea it will be quiteer at idle and just scream at WOT compaired to the NPI

ALOT quieter, or only a little? where i feel most of the power at?

Nuge · Oct 22, 2007

I should be receiving that exact kit from them soon. I initally bought just the intake mani in a seperate auction and the only issue I had was it was a Dorman intake and not an OEM Ford mani. The one in the "kit" does look a bit different than the one I received. The single piece had integrated "gaskets" where the kit has seperate gaskets.

Hopefully I will have something to report soon.

T

xsoutherngun89x · Oct 25, 2007

Just installed the kit from them last week. Keith and the boys down there at Custom Mustangs really put together
great kit. Was extremely happy with it. Really pulls hard all the way to redline. Even feels like i have a little bit more
down low, not much but enough. Also noticed a 2-3 MPG gain on the highway. Really impressed with the kit. :thumb:

xsoutherngun89x · Oct 25, 2007

:hammer:, forgot to mention it also kinda takes out the drone that we get around 2100-2300 RPM. Hard to tell but i think
mine actually made the drone come in around 200-300 RPM sooner.

Nuge · Oct 26, 2007

Great to hear. Thanks for sharing the info. Mine was sent out on Tuesday.

Goldmember · Oct 28, 2007

At this point you've probably received/installed the kit but this is also the kit I used, comes with EVERYTHING you need and is very easy to install. I am very pleased with the outcome.

Willis_98GT · Oct 28, 2007

been looking at this kit for a few days now, i was thining about doing it with the cams at the same time so i shit my pants even harder with performance gains!!

edit: i thought the kit was cheaper, the one i'm looking at is 349$.. am i wrong?

Nuge · Oct 28, 2007

I bought the following kit and just got it today.

http://cgi.ebay.com/ebaymotors/ws/e...0177427531&category0=&fvi=1&item=270177427531

Appears to have everything needed and all genuine Ford Parts. Very happy with my purchase.

T

Willis_98GT · Oct 28, 2007

even the drill or mod for both sensors? thats cheaper then the other website.

Nuge · Oct 28, 2007

Willis_98GT said:
even the drill or mod for both sensors? thats cheaper then the other website.

Yep had both sensor holes already in it. I'll double check but I'm pretty sure it came with a set of PI gaskets and not NPI's. PN on the gaskets are YL3Z-9439-BA, pretty sure someone can confirm they are PI.

Murder after Midnight · Oct 29, 2007

Man I'm glad you guys posted this I almost bought the livernois kit for $500 lol

xsoutherngun89x · Oct 29, 2007

lol yea this kit really works well. i havent had any problems with it, cant say the same for Chevron Gas though, lol.
never gonna buy gas from that station anytime soon.

Jrgunn5150 · Oct 29, 2007

xsoutherngun89x said:
lol yea this kit really works well. i havent had any problems with it, cant say the same for Chevron Gas though, lol.
never gonna buy gas from that station anytime soon.

Lol I've always bought gas from Chevron, I hate ARCo.

xsoutherngun89x · Oct 29, 2007

lol just made a topic about what happend, i think it had water in it. I use Entec, its not eveywhere but they sell 93.5 octane
fuel. its some of the best gas u can run through ure engine.