For all you T-1 Wing lovers...

[birel21y]

http://cgi.ebay.com/ebaymotors/94-98-Mustang-Saleen-SR-SCCA-T1-rear-race-spoiler-SN95_W0QQcmdZViewItemQQhashZitem19b9b66ac1QQitemZ110489922241QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_1182

Now on Ebay!!

We make these for Tiger Racing, and i can stand behind the quality.

 

[NERD]

It's awesome but suck my ass it's not that awesome. That price is stupid.

 

[MustangChris]

Can i go around tiger racing and get one direct from you for the $75.00 it cost to produce it? :-D

also how does it attach? it appears there are no threads on the spoiler for the nuts to screw to inside the trunk.

im very interested, as i think these look good.

also, how much would it cost for you to customize one for me? (shave a lil' off the top.) by fabricating the design, you can probably get around any non-competition clauses set forth with your dealers, if applicable...

this fiberglass or urethane?

 

[MustangChris]

It's awesome but suck my ass it's not that awesome. That price is stupid.

true saleen ones go for $1,000+ lol. :-(

 

[NERD]

No reason in the world to want or pay that much for a wing.

 

[MustangChris]

No reason in the world to want or pay that much for a wing.

im willing to spend the $300 on this, but def. not the $1k for the saleen.. .. . thats like, 15 minutes at the strip club...

 

[badass98svt]

im willing to spend the $300 on this

$300? Where do you see $300?
I see $380 + $80 shipping = $460!!!!

No way would i pay that. the guys that had them made on SVTP paid less than that! LOL


Plus the original s281 styling is still the best! Unless, you have a purpose built auto x car.

 

[auto_x5.0]

im willing to spend the $300 on this

$300? Where do you see $300?
I see $380 + $80 shipping = $460!!!!

No way would i pay that. the guys that had them made on SVTP paid less than that! LOL


Plus the original s281 styling is still the best! Unless, you have a purpose built auto x car.

H*ll this wouldnt even really help in autox, more open track cars. But If your building an all out SCCA car, there are better spoilers out there for your money.
I do like the uniqueness of the T-1 wing though

 

[MustangChris]

im willing to spend the $300 on this

$300? Where do you see $300?
I see $380 + $80 shipping = $460!!!!

No way would i pay that. the guys that had them made on SVTP paid less than that! LOL


Plus the original s281 styling is still the best! Unless, you have a purpose built auto x car.

for an instant purchase, this is a reasonable deal. the 80$ shipping (which i didnt make note of) is a little hard to swallow, but you have to understand they are in the business of making money, not friends- and if someone in maine orders it, they have to cover their costs. You can probably find one cheeper, but you will have to hunt for it... if you want an instant-purchase this is a resonable deal. plus not many people are into group buys... as ive seen at least 2 of these fail on sn95forums. (autobadges and some racing seats)

as for the s281, i agree it looks a little better than the T1. but some of us want to hold a little more orginality in our cars... s281... bullits... cobra front bumper... all have been used and abused IMO.

 

[birel21y]

Can i go around tiger racing and get one direct from you for the $75.00 it cost to produce it? :-D

also how does it attach? it appears there are no threads on the spoiler for the nuts to screw to inside the trunk.

im very interested, as i think these look good.

also, how much would it cost for you to customize one for me? (shave a lil' off the top.) by fabricating the design, you can probably get around any non-competition clauses set forth with your dealers, if applicable...

this fiberglass or urethane?

Hi Chris,

Its a fiberglass piece, and fits like a glove. Its 4 bolts for mounting- all in the factory holes. I cant customize it for you, as its a PITA, and would be very expensive. Ive wanted to cut mine down about 1" or so, but a fiberglass wing is a 2 piece design, and you would have to fill the top of the wing where you cut. The bottom has threaded bungs that are bonded into the fiberglass, and you will use the supplied bolts to mount. no studs like the factory wing. Unfortunately because we are only the manufacture, we can not sell direct. you must go through Tiger Racing to buy.

 

[MustangChris]

Can i go around tiger racing and get one direct from you for the $75.00 it cost to produce it? :-D

also how does it attach? it appears there are no threads on the spoiler for the nuts to screw to inside the trunk.

im very interested, as i think these look good.

also, how much would it cost for you to customize one for me? (shave a lil' off the top.) by fabricating the design, you can probably get around any non-competition clauses set forth with your dealers, if applicable...

this fiberglass or urethane?

Hi Chris,

Its a fiberglass piece, and fits like a glove. Its 4 bolts for mounting- all in the factory holes. I cant customize it for you, as its a PITA, and would be very expensive. Ive wanted to cut mine down about 1" or so, but a fiberglass wing is a 2 piece design, and you would have to fill the top of the wing where you cut. The bottom has threaded bungs that are bonded into the fiberglass, and you will use the supplied bolts to mount. no studs like the factory wing. Unfortunately because we are only the manufacture, we can not sell direct. you must go through Tiger Racing to buy.

can Chris' race shop sell them?? first order: 1. lol.

so you supply new bolts that go into the wing?

you should PM me bro. i run a plastic's company and i need some help breaking into the automotive industry... i'd like to yack at ya about manufacturing and supply, not the T1.

 

[birel21y]

im willing to spend the $300 on this

$300? Where do you see $300?
I see $380 + $80 shipping = $460!!!!

No way would i pay that. the guys that had them made on SVTP paid less than that! LOL


Plus the original s281 styling is still the best! Unless, you have a purpose built auto x car.

for an instant purchase, this is a reasonable deal. the 80$ shipping (which i didnt make note of) is a little hard to swallow, but you have to understand they are in the business of making money, not friends- and if someone in maine orders it, they have to cover their costs. You can probably find one cheeper, but you will have to hunt for it... if you want an instant-purchase this is a resonable deal. plus not many people are into group buys... as ive seen at least 2 of these fail on sn95forums. (autobadges and some racing seats)

as for the s281, i agree it looks a little better than the T1. but some of us want to hold a little more orginality in our cars... s281... bullits... cobra front bumper... all have been used and abused IMO.

+1. the T-1 is either a love or hate relationship. I like mine because its different. Not because it looks better, but because its more original. Plus, when your at 80-90+ you feel the rear end stiffen up.

 

[duh09]

I love how one of the pictures is of the rear end of white95's car.

 

[Steve-Oh]

Why does every have to come in and rain on his parade?! If you don't like to price then don't buy it! It's only worth as much as someone is willing to pay for it.

 

[Untame-d]

No shipping to Canada = boo!

 

[NERD]

I love the T-1 I just hate the Price.... Yup, Love/Hate.

 

[MustangChris]

No shipping to Canada = boo!

if only you had a buddy in the states... lol.

ill buy it off ebay for you (paypal me first, of course) and mail it to you and you can re-pay me the shipping.

 

[Untame-d]

Wasn't interested. Just stating that no shipping to canada = boo!

I like the s281.

 

[MustangChris]

gotcha.

 

[95PGTTech]

I hope the seller has the permission of those car owners to use their photos for advertisement purposes.