Head install question(related to cam)

[BruhBrahBrad]

Ok quick run down, my car has stock heads and intake, but a aftermarket cam... In theory shouldnt I be safe with installing gt40p heads? I shouldnt have any issues, if I didnt have any with the E7s right?

 

[Win]

You technically probably will be fine but STILL CHECK PTV. While you have everything apart go ahead and upgrade the RR's and do the springs if you have the money.

 

[BruhBrahBrad]

I should crack my valve covers to see if any of that stuffs been changed but I dont wanna waste a valve cover gasket just yet.

 

[Win]

Well since your going to be close to doing a all Gasket kit just snag up the FRPP Kit That way then you have everything on the ready. I also have the Felpro Intake kit also with mine.

http://www.cjponyparts.com/product....gle&utm_medium=merchant&utm_campaign=shopping

 

[BruhBrahBrad]

Good stuff Win thanks for the link.

 

[Win]

That's the cheapest i have found it with the Free Shipping.

if you can swing it snag up the TFS Spring kit for iron heads, and some 1.6RR or some Crane Cobra 1.7RR just make sure to check the PTV

 

[BruhBrahBrad]

You know where the spring kit can be found?

 

[Win]

LMR

This is all i left to buy. Although this will take care of you and you'll be set.

ARP-1543601 79-95 MUSTANG 5.0L ARP HIGH PERFORMANCE SERIES HEX HEAD BOLT KIT
$ 44.99
M6003A50 79-95 MUSTANG 5.0L/5.8L COMPLETE ENGINE GASKET SET, M-6003-A50
$ 79.99
TFS-2500100 79-95 MUSTANG 5.0L/5.8L TRICK FLOW VALVE SPRING UPGRADE KIT FOR OE STYLE CAST IRON HEADS
$ 149.99
Order Total: $ 274.97

 

[rz5.0]

unless the gt40p have been milled alot and you swich to 1.7 you should be fine

 

[Win]

unless the gt40p have been milled alot and you swich to 1.7 you should be fine

Yeah i think he would get the most out of the heads if he used a 1.7RR