danielson631
Active Member
- Joined
- Jun 1, 2009
- Messages
- 802
- Reaction score
- 3
im deleting the SAI system on my car, and need to cap the hard lines that run to the exhaust manifolds.
i soaked them in pb blaster, and did it while the exhaust was pretty damn hot. but i cant get them off still. im having A LOT of trouble with them.
not to mention there is NOT much room at all to move the 15/16 wrench around in there. i need to get these off.
maybe im doing something wrong? do i have to remove the fitting by the actuator valves first? and then the one to the ex. manifold?
any help or tips for removing this would be greatly appreciated!
i soaked them in pb blaster, and did it while the exhaust was pretty damn hot. but i cant get them off still. im having A LOT of trouble with them.
not to mention there is NOT much room at all to move the 15/16 wrench around in there. i need to get these off.
maybe im doing something wrong? do i have to remove the fitting by the actuator valves first? and then the one to the ex. manifold?
any help or tips for removing this would be greatly appreciated!
