how to install a boost guage?
- Thread starter 96PonyGT
- Start date
Michael Plummer
Active Member
Hi there,
Just make sure that your source(vac/boost) is from the intake manifold. Just use a "vacuum tee" to tap into any vacuum line coming from your intake manifold.
Good luck
Michael Plummer
Just make sure that your source(vac/boost) is from the intake manifold. Just use a "vacuum tee" to tap into any vacuum line coming from your intake manifold.
Good luck
Michael Plummer
well I tried teeing into the line on the fuel rail, the fuel pressure regulator i think it is, because I noticed that a line goes into there from my BPV so I figured I would do it there after I broke some of the red vac lines going into the plenum. I did it and the gauge doesnt read anything.
Michael Plummer
Active Member
Hi there,
When you said the guage did nothing did you run the car up to boost? is this a vacuum/boost guage or just a boost guage? Also, I would use another vacuum port instead of the one you tried.
Michael Plummer
When you said the guage did nothing did you run the car up to boost? is this a vacuum/boost guage or just a boost guage? Also, I would use another vacuum port instead of the one you tried.
Michael Plummer
Similar threads
