stangman281v8
Member
Hello All,
I recently purchased a 1995 Mustang GT. The temp gauge was not working so I replaced it with a cluster from another GT. The millage on the original cluster is 104,XXX and the millage on the new cluster is 84,XXX. the millage on the new cluster is not working.
So here is my question. Is it possible to remove the odometer and trip along with the electronics from the original cluster and swap it over to the new cluster without taking the gauge face. The gauge faces are white from the original cluster.
Or can I roll the millage forward on the new cluster when I replace the gears in the cluster.
Thanks,
Rob
I recently purchased a 1995 Mustang GT. The temp gauge was not working so I replaced it with a cluster from another GT. The millage on the original cluster is 104,XXX and the millage on the new cluster is 84,XXX. the millage on the new cluster is not working.
So here is my question. Is it possible to remove the odometer and trip along with the electronics from the original cluster and swap it over to the new cluster without taking the gauge face. The gauge faces are white from the original cluster.
Or can I roll the millage forward on the new cluster when I replace the gears in the cluster.
Thanks,
Rob