delling3
Active Member
Putting the finishing touches on my cam and intake swap. Got the engine started today for the first time since November 2020 - Huzzah!
Now the problem. As the car warming up I was getting some smoke rising off the right-side rear of the engine. At first I figured is was some random oil burining off, but I took a closer look, and it the rear-most injector is spraying fuel onto the top the engine instead of down the intake. I replaced all the o-rings/seals on the injectors before reinstalling them. Is it possible that one injector didn't seat all the way into the intake, and that tightening down the fuel rail didn't push it home either? I really don't look forward to tearng everything back down. Do you think I can just loosen the fuel rail and reseat it without pulling everything apart?
Now the problem. As the car warming up I was getting some smoke rising off the right-side rear of the engine. At first I figured is was some random oil burining off, but I took a closer look, and it the rear-most injector is spraying fuel onto the top the engine instead of down the intake. I replaced all the o-rings/seals on the injectors before reinstalling them. Is it possible that one injector didn't seat all the way into the intake, and that tightening down the fuel rail didn't push it home either? I really don't look forward to tearng everything back down. Do you think I can just loosen the fuel rail and reseat it without pulling everything apart?