Reply to thread

Message: <blockquote data-quote="JDwhite98gt" data-source="post: 695409" data-attributes="member: 10517"><p>So UPS dropped them off yesterday and I've been looking at the instrustions on their site for a week now. Everything seems pretty straight foward except for the part where the 4th hole needs to be drilled. I really dont understand the part where they say line up the old plate with the outer edge and inner edge of the slots. Is there a different way to measure the new hole location? Cant I measure the distances of the studs on the bottom plate in relation to the strut tower, mark where the new hole should be and drill? Or shoot even simpler put some paint on the top of the bottom plate studs, turn it over and voila, theres my drill mark. Just throwin ideas out there but let me know if you have any other ways of doing this or any other good write-ups. Thanks in advance</p></blockquote><p></p>