Need feeback on upr control arms

[snoball]

To start, I know theres better stuff out there but I dont drag race or anything in my car and will be selling it soon but am doing these to replace the worn stockers.

I just want the chromoly upr non adjustable ones uppers and lowers. Anyone here running them, if so any issues and did it raise the back of the car up at all? etc. Any feedback appreciated.

 

[vermilion]

they move the sway bar back a half inch. they are top notch imo but the urethane bushings could be better.

 

[SRT Handz]

UPR control arms are probably the worst you can buy.... Read my thread on URP Rod end that come on the control arm.... They are cheap Chinese junk that fail.

 

[Newman]

good info!!!

 

[ReplicaR]

UPR control arms are probably the worst you can buy.... Read my thread on URP Rod end that come on the control arm.... They are cheap Chinese junk that fail.

Post a link if you want people to read your thread.

 

[vermilion]

just because you had a bad experience with 1 product of UPRs doesnt mean that every piece is garbage. i had their control arms. id use them again. dont spill misleading info but you are entitled to your opinion even if your credebility is tainted.

 

[SRT Handz]

I am not spitting mis-information. I have seen (From my own personal Buying Experience) The shit products that UPR produces.

If you dont believe me on how shitty they are, ask Dalamar.... He went through the same upr shit boat I did.

 

[vermilion]

i have/had a couple of their products not one was bad quality or broken. rod ends are something that just wear and tear. a heim joint will oval out over time or bushings will pull out of socket. its the nature of enginuity. not one product that has never broken period! if you mention MM you are a certified nutswinger. shit wears and breaks. its inevitable.

 

[Insayne]

nutswinger?

 

[snoball]

I ordered them. Should be here tommorrow, Ill let you guys know how they are. But as far as crap, I doubt that, when i posted this on my local board there was at least 5 people cutting sub 1.6 60 foots on 11 second or faster cars, so I think my slow car will be fine. I find the people who call products crap, are usually the ones who spent the big money on the parts who got the same quality as the guy who got it for cheaper for the most part.

 

[vermilion]

it should serve you well.