Need help to identify this part.

[Paul]

Correct. It should be a stainless hard line, and be attached to a bung on the header.

 

[Addermk2]

Correct. It should be a stainless hard line, and be attached to a bung on the header.

IF you want the EGR to function

 

[vinniepearl]

So the rubber hose circled below is the one that should be stainless steel, instead of rubber right?

Not trying to jack this thread, but that little plastic piece connected to the throttle body right above it is for cruise control right? I forgot to hook mine back up last night and nothing changed, and my cruise control has never worked.

 

[Paul]

Yes, that's for cruise control.

IF you want the EGR to function

There is no performance benefit to removing EGR.

 

[ddrracing]

IF you want the EGR to function

There is no performance benefit to removing EGR.

+1

 

[Javi]

Correct. It should be a stainless hard line, and be attached to a bung on the header.

Great,Thanks for the Help.

for what i cant tell that is a ONE piece right? from the header bung to wherever it gets hooked up.