need to know if

ReplicaR

Well-Known Member
Joined
Mar 2, 2007
Messages
3,506
Reaction score
549
You can do it, but you will have to run a pretty low spring rate. HP series has pretty weak valving, so I doubt it will cope with anything over 175 coilover spring.
 

cntchds

Active Member
Joined
Sep 9, 2007
Messages
946
Reaction score
3
The information I got from MM was basically "don't do it." They are meant for fairly low spring rates, and are really marginally better than stock dampers. I would only think about doing a coilover set up on Bilsteins, Konis, or D-Spec Tokicos(If for some reason you are completely in dire need to use Tokicos.)

But to answer your original question, yes any Tokico coil over kit will directly fit onto your HPs.
 

Javi

Mythic Level
Joined
Sep 8, 2007
Messages
27,321
Reaction score
57
Location
Th3 405
Bilsteins or konis.

other than that, wouldnt be worth buying coilovers. IMO
 

Latest posts

Forum statistics

Threads
78,527
Messages
1,535,652
Members
16,185
Latest member
dmen76

Members online

Top