Not so low, Low, Lower...

[Schiffy]

I put the new Dropzone springs on the car today, looks MUCH better, just need to put some spacers on the rear, to make it look right. other than that, not much else as far as the body goes, MAYBE an S281 spoiler if i can find one for the right price... anyways, here are the pictures starting with Stock, then to the 1st set of springs, then onto the last set, that i put on today. Ignore the lack of a spoiler, i took it off to clean the underside of it, and also the decklid, but in the process of taking it off, the damn thing stripped one of the bolts out, and it's sticking up out of the decklid :slap:

 

[94Vert]

ics:

 

[Schiffy]

damn... I need somebody to host my pics, so i can post them... I suck at the interweb :slap:

 

[rick focks]

$10 to become a supporting member, comes w/hosting if memory serves

 

[Lightning Struck]

^1 havent we gone into supporting member status with you before :hammer: :hammer:

if the pics are on your PC just click the additonal options tap in the lower left corner and attach the pics

 

[TxCobrA98]

PM sent, you can email the pics to me if youd like and ill post em up.

 

[Schiffy]

]
PM sent, you can email the pics to me if youd like and ill post em up.

Done, thank you...

 

[TxCobrA98]

Hey guy, here is the pics of his car!

STOCK

SprangZ Springs w/ new rims

Current - Dropzone Springs

 

[scarface]

get poly isolators for the rear and it will raise it up .5 inch.

 

[Red96GT]

Looks great I like the red calipers and wingless look. Nice car!

 

[OnyxCobra]

That looks great man, love the wheels too.

 

[Schiffy]

Thanks guys... the wingless look was so i could clean the bottom of the spoiler, and the decklid uner the spoiler. but it turned into a nightmare, when the driver side front bolt ripped out of the spoiler and is STILL in the decklid poking out. LOL... it's cool though, i'm getting the S281 wing for Xmas!!!! also thanks TxCobra98 for posting them up for me... i suck at the internet and what not... but just so you guys know, i'm putting money in paypal to become a supporting member so i can host the pics. LOL... tranny's going in today, hopefully it'll go in without problems.
as for the isolators, where can i pick those up? i need some, the rears were completely chewed up. in fact the passenger side sits about .5" higher, than the driver because the driver isolator cup is basically nothing.

 

[scarface]

use a pair of vice grips on the top of the bolt sticking through the trunk, and a socket on the bottom nut...You should be able to get it out that way.

I think you can get the isos at Maximum motorsports.

 

[Schiffy]

use a pair of vice grips on the top of the bolt sticking through the trunk, and a socket on the bottom nut...You should be able to get it out that way.

I think you can get the isos at Maximum motorsports.

Whats up with your sig? the picture looks different... I'm wathing the Auburn/LSU game (WAR DAMN EAGLE, GO AUBURN) so i'll look into MM for the Iso's... I filled the hole in the spoiler with liquid cement, then drill it out with a tap, and screwed the bolt back into it. lol... it worked though. it'll be ok till christmas time when i buy my S281 spoiler.

 

[94darkhorse]

Looks good.

 

[Schiffy]

thank you....

 

[scarface]

use a pair of vice grips on the top of the bolt sticking through the trunk, and a socket on the bottom nut...You should be able to get it out that way.

I think you can get the isos at Maximum motorsports.

Whats up with your sig? the picture looks different... I'm wathing the Auburn/LSU game (WAR DAMN EAGLE, GO AUBURN) so i'll look into MM for the Iso's... I filled the hole in the spoiler with liquid cement, then drill it out with a tap, and screwed the bolt back into it. lol... it worked though. it'll be ok till christmas time when i buy my S281 spoiler.

its just a different picture with an updated shot of my car. No spoiler, 03 side scoops, and solid axel.

 

[Schiffy]

use a pair of vice grips on the top of the bolt sticking through the trunk, and a socket on the bottom nut...You should be able to get it out that way.

I think you can get the isos at Maximum motorsports.

Whats up with your sig? the picture looks different... I'm wathing the Auburn/LSU game (WAR DAMN EAGLE, GO AUBURN) so i'll look into MM for the Iso's... I filled the hole in the spoiler with liquid cement, then drill it out with a tap, and screwed the bolt back into it. lol... it worked though. it'll be ok till christmas time when i buy my S281 spoiler.

its just a different picture with an updated shot of my car. No spoiler, 03 side scoops, and solid axel.

Looks good... I took the spoiler off mine, but put it back on... i'm realling excited, i'm acting like a little school girl about christmas this year, cause i'm getting my S-281 spoiler.

 

[scarface]

:lol:

 

[Schiffy]

:lol:

:slap: