POST PICS AND INFO PLZ

91MARO95STANG · Oct 10, 2010

so im thinking of making my engine bay look clean and more muscular but dont know where to start from.

95 mustang 5.0
cobra intake
accel cables red
looking for a strut bar (any in mind)
looking to change the oil cap to a new one or a filter looking one (what do you all think?)

thats it just want it nice and simple

Adam95GT · Oct 11, 2010

Just clean the thing.

Its Free...

Or you could Shave the whole bay, delete your AC and Smog, Repaint it, And hide your wires...

rz5.0 · Oct 11, 2010

were did you put the harness behind the engine???

Mntlkase · Oct 11, 2010

:thumbsup: Now that, my friends, is a beautiful engine bay! :headbang:

91MARO95STANG · Oct 11, 2010

wow bro you went all out im still keeping my a/c here in texas it get kinda hot sometimes specillay when i got kids they hate when its hot but other than that really really nice!

95opal · Oct 11, 2010

Tme and money lolol or a bottle of simple green and call it as day.

tommybunz · Oct 11, 2010

what do you guys use to do your inner fenders been wanting to do mine but dont know if its welded or panels lmk

gregbar · Oct 11, 2010

Maximum motorsports brace is a nice piece.

95opal · Oct 12, 2010

tommybunz said:
what do you guys use to do your inner fenders been wanting to do mine but dont know if its welded or panels lmk

Welded in sheetmetal for the fender aprons.

bradtheblade · Oct 12, 2010

where are you putting the fuze block and all the dang alt and starter wires.

blkmcnasty · Oct 12, 2010

A can of black spray paint goes a long way. Like Adam95GT did, spray the power steering pump, brake booster, and alternator cover and that will help get the ball rolling to cleanliness.

95opal · Oct 14, 2010

bradtheblade said:
where are you putting the fuze block and all the dang alt and starter wires.

The fuse block goes in the drivers side fender. The alt and starter wires are under the engine.

94svtturbo · Oct 14, 2010

95opal said:
The fuse block goes in the drivers side fender. The alt and starter wires are under the engine.

What did you do with the wiring on the firewall? Did you put them on the other side then drill a hole for them to come out where needed?

94svtturbo · Oct 19, 2010

bump.

anybody know how to hide the wiring harness that runs along the firewall?

modo · Oct 19, 2010

95opal said:
Tme and money lolol or a bottle of simple green and call it as day.

bay is real sharp dude... nice job

are you using behind the bars fuel rails? looks like it from the pic.

95opal · Oct 19, 2010

modo said:
95opal said:

Tme and money lolol or a bottle of simple green and call it as day.

Click to expand...

bay is real sharp dude... nice job

are you using behind the bars fuel rails? looks like it from the pic.

Yes they are BBRC rails

94svtturbo you can pull one side in threw the trans tunnel there is a gromet but you wil need to open it up a tad..and the other end threw the stock location in the inner fender then reconect them under the dash

Dalamar · Oct 19, 2010

50's are easier to clean up, less crap bolted to the engine.

re running the harnas makes a big visual improvement IMO.

Paul · Oct 20, 2010

Opal, you shoulda had that manifold sanded/polished before coating so it had a nice smooth finish.

...but of course the motor looks really nice.

94svtturbo · Oct 20, 2010

Thanks for the info Opal!! I really appreciate it cuz i would like to try and rid of as many wires as possible from underneath my hood this winter when my car is parked

Dalamar · Oct 20, 2010

Paul said:
Opal, you shoulda had that manifold sanded/polished before coating so it had a nice smooth finish.

...but of course the motor looks really nice.

It sounds to me like Paul is saying he's a lil bored, not enough to do at work AND he want's you to send your IM to him, and he'll re sand it and and re coat it.

ccasion14:
he does good work.