radiator support

Discussion in '94-95 5.0 - Specific' started by hipo50mustang, Jun 19, 2007.

  1. hipo50mustang

    hipo50mustang New Member

    Messages:
    55
    Likes Received:
    0
    Joined:
    May 10, 2007
    Ok, so I took off my front bumper cover to replace it with a cobra one, and found that steel bumper with one of the bumper absorkers (the steel support and not the styrophome (sp?) piece) were bent and very badly welded by the previous owner. :lame: and the radiator support os also bent. I was wanting to replace the whole thing while I have the front end torn apart. how hard would it be and what all is involved? i understand that I will have to take the radiator and all associated items out, but as far as the actual support, is it just the spot welds or is it more?
    thanks for any help,
    Mac
     
  2. ryclef331

    ryclef331 Well-Known Member

    Messages:
    2,913
    Likes Received:
    9
    Joined:
    Jan 20, 2006
    It should be just spot welds but its going to be a bitch....period.