car is shaking back and forth while driving, and other day I change my tranmission fluid, and saw those 2 bolt is loose, I tight 1 up, and other one just really loose, I dont know what this part is, it right next to tranmission pan .
shaking while driving, is this might be the problem , pix inside
- Thread starter killagt
- Start date
94RedGt
Member
That is your trans mount i think, it should be tight or else the trans will be moving around while u give the car gas or brake. I suggest you get a new mount if that one looks old.
CC'S95GT
Post Whore
That's the transmission mount. If the bolt cannot be tightened then it's FUBAR and needs replaced.
Tell us more about the shaking. Speeds? Gears? Accelerating? Decelerating?
It could be the harmonic balancer needs replaced, worn out u-joints, bent axel, bent wheel.
Tell us more about the shaking. Speeds? Gears? Accelerating? Decelerating?
It could be the harmonic balancer needs replaced, worn out u-joints, bent axel, bent wheel.
justinschmidt1
Post Whore
- Joined
- Dec 4, 2006
- Messages
- 10,663
- Reaction score
- 430
Its simple to replace the whole thing...just support the trans with a jack and theres 2 bolts on the side of the bracket to the fram and the 2 bolts underneath there.
Does the car make a bang sound if you step on the gas quick from a stop? If it does it's the trans twisting up and banging down on the mount, easy to fix or cheap to have someone else do it...I think I paid $80 out the door to have the mount on my Camaro changed.
no bang noise
1997gtRioRed
Well-Known Member
- Joined
- Sep 29, 2011
- Messages
- 2,272
- Reaction score
- 201
a parts store.
justinschmidt1
Post Whore
- Joined
- Dec 4, 2006
- Messages
- 10,663
- Reaction score
- 430
I got mine from kmart in the hardware section
is manual and auto tranmission using the same tranmission mount ? because I look online and it dint say auto or manual. thanks, btw when install do I have to remove the cross member off , then take the tranmission mount off ? thanks
