Thanks for the comments guys. The Mach is Torch Red. It's my weekend toy and the Cobra is my daily driver. I drove the Mach and dad got "stuck" with the Cobra.
Here are the suspension setups for the cars:
Mach:
Front:
Intrax Springs (cut 1/2 coil)
MM Caster Camber Plates
MM Upper and Lower Urethane Isolators
MM Aluminum Rack Bushings
Steeda Bumpsteer Kit
Steeda X2 Ball Joints
Tokico D-Spec Struts
Rear:
Intrax Springs
MM Adjustable Lower Control Arms, Adjusted to lowest setting
MM Upper and Lower Urethane Isolators
Tokico D-Spec Shocks
AZA Z1 wheels, 18"x8.5" with 245/40/18 in the front and 18"x9.5" with 295/35/18 in the rear.
Cobra:
Front:
Eibach Prokit Springs
MM Caster Camber Plates
MM Aluminum Rack Bushings
Steeda Bumpsteer Kit
Steeda X2 Ball Joints
Rear:
Eibach Prokit Springs
MM Standard Lower Control Arms
FRPP Upper Control Arms
Stock 17"x8" Mach 1 wheels with 245/45/17 all the way around.
I swapped out the springs, struts and shocks on the Cobra about an hour after the pics were taken. It now has Eibach Sportline springs and Tokico HP struts and shocks.