SN95 I have a challenge for you.

[5.Woahhh]

I just picked up a 03 GT Motor with 51 K on it. I'll be getting it within the next month or so. I propose a challenge. I have picked out what I want to do for my car but I want to get your guys input. T

Challenge build 2V motor with as much HP as possible for under $3500. No EBAY or Craigslist, it needs to be from a store. The Winner with get bragging rights and able to say they help build my motor. I may not use the exact set up but we'll see. I also think it it will be interesting to see what some people come up with

The motor needs an intake manifold so that must be included. Other then that its up to you.

Extra points to those who plan for boost in the future.

 

[5.Woahhh]

Oh and don't be like get a this or that motor. I want to build a 2v.

 

[DropTopPony]

Trickflow Heads/ Intake and custom cams for the new heads.....

I WIN

 

[jc95gt]

Trickflow Heads/ Intake and custom cams for the new heads.....

I WIN

nope...get the most nitrous you can afford and for about 2 seconds you have the most HP, but then ull have no engine lol

but +1 on the trickflow heads w.o a doubt

 

[5.Woahhh]

Trickflow Heads/ Intake and custom cams for the new heads.....

I WIN

How much better do they flow as opposed to PI heads?

 

[justinschmidt1]

Trickflow Heads/ Intake and custom cams for the new heads.....

I WIN

How much better do they flow as opposed to PI heads?

A lot, I would say trickflow heads, p 51 intake, and a custom set of stg 2 or 3 cams

 

[DropTopPony]

Trickflow Heads/ Intake and custom cams for the new heads.....

I WIN

How much better do they flow as opposed to PI heads?

From the early reports, a lot more. They cost the same as my StII Fox Lake prepped PIs but are so much nicer. A complete redesign of the chamber and valve location. If i ever get a serious itch to up my project i would get them for sure.

 

[5.Woahhh]

Then I can sell the PI heads and Cams to recoupe some of my losses.

 

[Late4Work]

trick flow heads, p51 intake, forged internals and a beefier rear axle, a nice size cam, little bit of juice

 

[D3VST8R96GT]

trick flow heads p51 and a NOS or ZEX kit

 

[Paul]

Stick the motor in, then slap an NX wet nitrous 175 shot on it. Boo yah, what do I win?

 

[5.Woahhh]

I'm trying to stay away from the giggle juice because I don't see the track enough. NA HP is super reliable so I want to stick with that.

Im thinking:
TF heads
Fox Lake P51 intake
75mm TB
Custom Cams
Long Tubes
JLT CAI
Upgraded ignition and cooling goodies.

Hows that sound?

 

[duff daddy]

Trickflow Heads/ Intake and custom cams for the new heads.....

I WIN

How much better do they flow as opposed to PI heads?

A lot, I would say trickflow heads, p 51 intake, and a custom set of stg 2 or 3 cams

p51 is a power adder intake it wont make as much or help out as much as you think unless you get some extra air to take up the extra room of the p51



if it was me i would just send the heads out to fox lake or modular head shop get them worked good valves and springs, get some stage 2 or 3 cams from comp 234* 232* ? i think ... and see if you can pick up a good set of flat top pistons, get some long tubes and your stock pi intake manifold THEY ARE THE BEST FOR THE MONEY, after that just exhaust pullies255 walbro and the other stupid bolt on stuff... trash your seat but an aluminum kirkey gut the car and youll see 12.5's with slicks or more if you drive it and have a good track

 

[DSTRBD]

www.andersonfordmotorsport.comhttp://