V6 Block question

[orodi]

How much HP/TQ will a 1994-1998 V6 motor/trans take? This might be in a thread already but I am kicking around a V6 Turbo idea

 

[cnryYell0gt]

350rw. anything over that and you will blow.

 

[cnryYell0gt]

also the block will never go. no one has put out enough power to crack one. and there are some high output people.

 

[atlanticblue98]

what he said.

the stock Rods and Pistons can take ~350rwhp but the Block and Crank have made it to 700hp with no signs of breaking

 

[cnryYell0gt]

and good luck hitting 700.

 

[atlanticblue98]

and good luck hitting 700.

thats not the point kevin

 

[silver 4.6]

yeah, dont insult v6's while atlantic is around..

 

[atlanticblue98]

yeah, dont insult v6's while atlantic is around..

its fine, i know kevin. he has a V6 anyways.

but he is right, it takes alot to get to 700, but it has been done

 

[cnryYell0gt]

yeah, dont insult v6's while atlantic is around..

its fine, i know kevin. he has a V6 anyways.

but he is right, it takes alot to get to 700, but it has been done

i know all too well the woes of the quest for 500+ lol

 

[atlanticblue98]

yeah, dont insult v6's while atlantic is around..

its fine, i know kevin. he has a V6 anyways.

but he is right, it takes alot to get to 700, but it has been done

i know all too well the woes of the quest for 500+ lol

you havent done anything yet...

 

[orodi]

Who carries a good internal setup for a v6? pistons,rods, and crank? I am pushing to make around 400 to the wheels, mainly just to have fun with the thing nothing more. How is the aftermarket transmission options for them?

 

[MustangChris]

http://www.supersixmotorsports.com/pdf/SSM2009catrev1ForgedInternals.pdf

http://www.supersixmotorsports.com/

 

[atlanticblue98]

Who carries a good internal setup for a v6? pistons,rods, and crank? I am pushing to make around 400 to the wheels, mainly just to have fun with the thing nothing more. How is the aftermarket transmission options for them?

Super Six Motorsports has good internals, the stock 3.8 crank will be fine but if you wanna go with a stroker, they have those as well.

are you gonna go with a auto or manual? the 3.8 has the same bolt patterns are the 5.0

the 4R70W automatic in the 96-04 V6 uses a different bolt pattern than the 4.6, so a built 4R70W for a GT or any other 4.6 wont work.

 

[orodi]

I hate auto cars, so it will be a stick I have a TKO in my garage so I will use that then.

 

[MustangChris]

might need a custom bell hosing cut.

 

[cnryYell0gt]

might need a custom bell hosing cut.

not if it's meant for the 5.0. you can use a t56 on our engines without an issue. just need a hard to find bellhouse and custom driveshaft lol.

 

[orodi]

Yeah this will be a "when I have time and $$" project nothing I am in a hurrry to build but I did find a pretty clean looking 1995 V6 5pd. So far looks like a perfect candidate. If I do buy it the poor thing won't know what hit it haha