Wheel and tire specs?

[Jardon]

Hey yall! Ive got a basically stock 94 mustang and just wanted some help or advice on what specs to run. A previous owner had put on Acura TL wheels that are bent AF and running 2 inch spacers in the rear and just want something that wont need spacers to work with decent tire width. Current tire size is 235/45R17 and I was thinking it could use more traction in the rear (and new shocks all around, but thats for later haha). Thank you in advance! On another note, I am searching thru marketplace to maybe find oem mustang wheels with 245 wide tires

 

[badass98svt]

Any 94-04 wheels will fit.
LMR and AM seel sets of wheels that will fit perfectly also.

 

[96blak54]

Mount on a set of tri-bar originals. They look good with the car lowered

 

[badass98svt]

Mount on a set of tri-bar originals. They look good with the car lowered

I always like those and the 97-98 GT polished split 5 spoke wheels

 

[Jardon]

Any 94-04 wheels will fit.
LMR and AM seel sets of wheels that will fit perfectly also.

I will definitely look around! The main thing i want to look for is a 245 wide rear with maybe 225 or 235 front. Personally I dont trust spacers one bit and want to get rid of my two inch rear spacers and find wheels that wont grind on my front control arms at full lock steering

 

[badass98svt]

You just need a set of 17 or 18x9 wheels and you'll be happy. They will take a 265 tire.
The important thing to do is make sure they are made for 94-04 Mustangs.
Your local Marketplace should have a bunch of sets available.

 

[Jardon]

You just need a set of 17 or 18x9 wheels and you'll be happy. They will take a 265 tire.
The important thing to do is make sure they are made for 94-04 Mustangs.
Your local Marketplace should have a bunch of sets available.

I have been on marketplace for a long time (basically since I got my stang) and basically skip over wheels that the owner dont know the specs. I was thinking maybe a 17x8.5 with a 245 or 255 rear with a +20 ish offset and fronts at maybe 17x7.5 or 8 wide with +25 ish offset

 

[badass98svt]

Literally just type in "94-04 mustang wheels" or "sn95 wheels"
Any of those will fit and look great. Send us a couple screenshots of what you see on there

 

[Jardon]

Literally just type in "94-04 mustang wheels" or "sn95 wheels"
Any of those will fit and look great. Send us a couple screenshots of what you see on there

Funny enough, my search is usually just "mustang wheels" and I just pick out the ones i like. Found a few sets for 200 and under

 

[RAU03MACH]

LMR has a good selection

 

[badass98svt]

Funny enough, my search is usually just "mustang wheels" and I just pick out the ones i like. Found a few sets for 200 and under

Try what I said, and they will all fit.

 

[Mustang5L5]

Try what I said, and they will all fit.

PJ.

Do you remember what size spacer you needed to clear the ATS brembos with the Cosmis wheels? Getting the itch to mount mine up.

 

[badass98svt]

PJ.

Do you remember what size spacer you needed to clear the ATS brembos with the Cosmis wheels? Getting the itch to mount mine up.

8mm if I remember correctly., Mike. I have the spacers down in the basement.
I can double check. I have the spacers down stairs.