which is a better cam for a supercharger?

[itsblue95]

Like I have stated in some of my other posts I will be supercharging my car in the near futur. So with that said which cam is a better boost cam the crane cams 2031 or the TFS stage 1? I have AFR 185s and know I will have to notch the piston.

 

[Javi]

crane 2031,B31,FTI.

 

[BLOWN 95GT]

For an off the shelf cam the F303 makes a great cam for boost, besides that I would go with a custom grind from comp cams.

 

[itsblue95]

so the F cam is a better then the TFS stage one for boost?

 

[auto_x5.0]

I have a TFS stage 1 I was gunna out in my dads cobra, I would told it was a good cam for boost.

 

[BLOWN 95GT]

I didn't say the tfs wasn't a good one for boost I have heard of people running the tfs stage 1 with superchargers but never run one myself, and yes the f 303 cam is a good cam for boosted applications. What supercharger are you planning on running?

 

[itsblue95]

Either a vortech si trim or t trim

 

[Javi]

A good HCI and S-Trim should make enough power to split the stock block, keep that on mind when choosing the supercharger.

 

[itsblue95]

I know javi I plan on getting a strong block next winter and do a 347

 

[BLOWN 95GT]

Do you already have a camshaft or are you going to buy one?

 

[itsblue95]

Ordering one today

 

[rz5.0]

steeda 19

 

[itsblue95]

Already got the TFS stage one

 

[BigTang]

the 2031 is a very mild cam, the b31 would be great w/ some 1.7's on it or see if you can run down a 1087.

 

[2slo95fiveoh]

the 2031 is a very mild cam, the b31 would be great w/ some 1.7's on it or see if you can run down a 1087.

The B31 is best used with 1.6 roller rockers, the B21 is the one for 1.7 rockers.. That was one of the first questions they asked
me on the phone when I called Anderson Ford Motorsports buying a cam.. Asked me my HCI, blower, Roller Rocker size, and injector size.
So I bought the B31 to go with my trickflow heads, systemax, S-trim with 12lbs of boost..
On a side note, it is exciting to see a car with my exact engine/blower setup on their website laying down 500rwhp..... :headbang:

 

[LAFENATU]

the 2031 is a very mild cam

I wouldn't go that far. I would say it is a mid range cam..it's not small buy any means and works well with a blower because it pushes hard on the exhaust side.

The TFS 1 will work really well..have fun itsblue95.

 

[itsblue95]

It should be a very fun street car when all said and done the h/c/I will be going on in a few weeks then a blower a few months later. Thanks for the help guys!