WTB; Various things for 95 V6 vert

Echo

Active Member
Joined
Dec 19, 2012
Messages
308
Reaction score
15
Location
Columbia, SC
Here's a list of things I'm looking to buy. Starting small right now, gotta get the car running decent before I start looking for any sort of fancy stuff. I'm also on a pretty tight budget because I have a few engine problems I need to get sorted out and I'm trying to get money together for all that so if you have anything listed below that you can let go of for a decent price let me know by posting here, or you can PM me. Please include shipping to 29169 in your pricing, unless you're willing to meet within an hour or so of Columbia, SC.

I've got a 95 V6 Convertible so anything I need is for that. List is mostly in order of priority/want-that-oirty.

-Service manual, because why not?
-Need a passenger-side window motor and regulator.
-Power steering pump
-Shocks. Apparently mine are no good. Really looking for a deal here, I'm not looking for anything pricey or aftermarket.
-Brake fluid sensor? My Brake light is constantly on, friend told me that's probably the issue.
-Oil Pressure sensor - Bottoms out randomly, a good smack sets it right.
-Vertical Taillights. Not a huge fan of the horizontals. For these I'll also need the wiring harness to make them work. I have two sets or horizontal in blue & red as well as one wiring harness I'm willing to trade.
-1" spacers
-Also in need of the door cup trim on driver side, my plastic tabs have all snapped off. Joekd provided a Driver-side cup that fits better and was in much better condition than my old one, however still broken tabs, so still needing this!
-Also in need of the trim pieces inside the mirrors for both sides.
-I'm in need of a new steering wheel, preferable black.
-Sun visors, passenger and driver side.
-Wouldn't mind a Double DIN bezel to swap in eventually when I get a better head unit.
-The little screws or plastic tabs or whatever that holds the trim/liner in the trunk up.


No Longer Need
-Driver side side powered side mirror. Glass is cracked, and the mirror won't adjust except by hand. -Payment Sent! Package Received! Thanks joekd!-
-Really needing a new convertible top switch. Mine gave out and I'm currently poking a stripped wire in the holes to put it up and down. - Fixed it myself. Just needed a real good cleaning. :)
-Grill. -Receive my new honeycomb grill from sn95 gt today! Thanks sn95 gt!-
-Shorty Antenna. Turns out Autozone has these in 13" for 10 bucks. Picked one up and it looks good!
-Ordered some seatbelt retainers from purevenm, got them yesterday! Thanks purvnm! Also received a 95 cobra 1/25 scale model. :D

-Coolant overflow tank cap - found at junkyard.
-Trunk 'Ford' emblem. - Ebay'd
 

joekd

Well-Known Member
Joined
Jan 14, 2009
Messages
3,968
Reaction score
129
Location
Ct
I have my pair of OEM mirrors in perfect condition, will shoot some pics tomorrow

Have some door cups also but think the tabs are broken will take a look for you
 
OP
OP
Echo

Echo

Active Member
Joined
Dec 19, 2012
Messages
308
Reaction score
15
Location
Columbia, SC
I have my pair of OEM mirrors in perfect condition, will shoot some pics tomorrow

Have some door cups also but think the tabs are broken will take a look for you

Definitely would appreciate it. Haven't found any door cups that aren't broken. Mirrors would be great too. Quote me a price. That's pretty low on my list so depending on that I may have to hold off on those in leui of some more pressing matters.
 

joekd

Well-Known Member
Joined
Jan 14, 2009
Messages
3,968
Reaction score
129
Location
Ct
Pm sent with pics of the mirrors and door cup
 
OP
OP
Echo

Echo

Active Member
Joined
Dec 19, 2012
Messages
308
Reaction score
15
Location
Columbia, SC
I have a honycomb Grill. LOL

Really!? Sweet, I had no clue. Lol, yeah still planning on that one tomorrow. Joekd's mirrors and cups are slightly bigger priority to me, but I'm pretty sure I can float both. I'll be letting you know tomorrow AM to confirm, sn95 gt.
 
OP
OP
Echo

Echo

Active Member
Joined
Dec 19, 2012
Messages
308
Reaction score
15
Location
Columbia, SC
Received Mirrors & door cups from Joekd last night. Got them on right away! Everything came in exactly as described and he even sent me a towel to clean everything with. Double bonus, the mirrors are blacker than my old ones were by a long shot. Thank you Joekd!
 
OP
OP
Echo

Echo

Active Member
Joined
Dec 19, 2012
Messages
308
Reaction score
15
Location
Columbia, SC
I've got a mint set of 25k mile shocks/struts off of a 1994 Cobra if you'd like them?

Name your price shipped to 29169. Low on cash so sorry if I'm not able to meet it until a couple weeks depending but I'm definitly in need of this. They'll fit my car right? XD
 

joekd

Well-Known Member
Joined
Jan 14, 2009
Messages
3,968
Reaction score
129
Location
Ct
Received Mirrors & door cups from Joekd last night. Got them on right away! Everything came in exactly as described and he even sent me a towel to clean everything with. Double bonus, the mirrors are blacker than my old ones were by a long shot. Thank you Joekd!

Those were genuine Holiday Inn stolen pool towels (don't tell anyone but I have a whole bag of them I use as gym towels)

The mirrors were the original ones on my car so to say the least they were well taken care of, the door cups on the other hand sat on my workbench forever so you may have a couple layers of grime to get through on those.
 
OP
OP
Echo

Echo

Active Member
Joined
Dec 19, 2012
Messages
308
Reaction score
15
Location
Columbia, SC
Those were genuine Holiday Inn stolen pool towels (don't tell anyone but I have a whole bag of them I use as gym towels)

The mirrors were the original ones on my car so to say the least they were well taken care of, the door cups on the other hand sat on my workbench forever so you may have a couple layers of grime to get through on those.

Much better looking than my mirrors were, no glass cracking, cleaner, blacker. Not to mention I had paint on mine from when I had the car painted at Econo (I know, but the price was so cheap!). Really apreciate it. The door cups are dirtier than my old ones, but the passenger fits like new now, and the driver is in better condition than my old one regaurdless. The underside where the window switches screwed on was superglued down before. Tab was broken in the same spot, but I had cracking in various places as well so all-in-all it's still an improvment. My window controls don't fall through! I'll be painting my interior eventually anyway so I'll just paint the cups as well after another cleaning and they'll look new. Can't thank you enough, Joe.
 
OP
OP
Echo

Echo

Active Member
Joined
Dec 19, 2012
Messages
308
Reaction score
15
Location
Columbia, SC
Received the grill from sn95 gt today! Came in great condition as described. Thanks sn95 gt! I'll put pics up once the hoodlatch comes in and I put it on.
 

Tony

Legend
Joined
May 23, 2012
Messages
9,397
Reaction score
985
Location
ohio
i have the oem coolant tank. gt though, dont know if it works for a 6 or not.
 
OP
OP
Echo

Echo

Active Member
Joined
Dec 19, 2012
Messages
308
Reaction score
15
Location
Columbia, SC
i have the oem coolant tank. gt though, dont know if it works for a 6 or not.

I don't actually need the tank, just the cap. Any random person on here would know better than me if that'd fit or not. I might be getting a cap from someone else right now, it's sort-of pending.

Damn man I want your wheels haha. What size tires are on there?

I assume you're directing this at me;
245/35 ZR20 in the front, 275/35 ZR20 in the back. I'm pretty ashamed to say I've added my share or curb-rash to the rims since I put them on... :/
 

joekd

Well-Known Member
Joined
Jan 14, 2009
Messages
3,968
Reaction score
129
Location
Ct
I say you make your weekend project to shorten your fly fishing rod...err, antenna

All you need is pliers, hacksaw, sandpaper and paint (I also used a drop of krazy glue to be sure the little ball end would stay on)

Shortened mine 2-3 times before I finally just got the delete plug for it
 
OP
OP
Echo

Echo

Active Member
Joined
Dec 19, 2012
Messages
308
Reaction score
15
Location
Columbia, SC
I say you make your weekend project to shorten your fly fishing rod...err, antenna

All you need is pliers, hacksaw, sandpaper and paint (I also used a drop of krazy glue to be sure the little ball end would stay on)

Shortened mine 2-3 times before I finally just got the delete plug for it

Actually planning on picking up a shorty this weekend. Apparently Autozone has ~13" for 10 bucks, and I have a 5$ coupon. So that'll work for me there. Need to take that off the list.
 

joekd

Well-Known Member
Joined
Jan 14, 2009
Messages
3,968
Reaction score
129
Location
Ct
Make sure it is the correct style with the thread on the end (bolt style) and not the more common thread inside end
 

Forum statistics

Threads
78,533
Messages
1,535,705
Members
16,186
Latest member
Armand

Members online

No members online now.
Top