yet another JLT question..

[TxCobrA98]

I just finished up polishing the CAI but I AM SOOOOOOOOOOOOOO CONFUSED at how this goes together.. i see this picture

ONE PIECE PIPE??

and then here is what I have. 2 piece? sorry i feel really dumb but im so confused at how this thing goes together..

 

[Schiffy]

Small rubber goes from TB to big pipe, and the elbow goes into the fender and connects to the MAF and Filter... the big flat plastic piece goes against the inside of the fender, to cover the hole to keep the heat out of the filter. the rest of the hoses are for breathers and shit.

 

[TxCobrA98]

yeah... well i looked at the instructions on JLT's website and for a 96-98 cobra, it is supposed to be a one piece pipe..

W T F?

 

[VertTireSmoke]

Did the guy who fixed it up cut it in half maybe? It looks like ur 2 peices make the one peice tho so maybe u can find some sort of rubber connector? As for actually putting it together i really don' know how to. I just had to take it off which was complicated enough for me. lol.

 

[Lightning Struck]

Did the guy who fixed it up cut it in half maybe? It looks like ur 2 peices make the one peice tho so maybe u can find some sort of rubber connector? As for actually putting it together i really don' know how to. I just had to take it off which was complicated enough for me. lol.

yes I would say its been cut in half, mine was a solid pipe. You will need to get another black sleeve to connect the two.......they have them at Lowes or Homedepot I think in the plumbing section.

 

[TxCobrA98]

yeah thats what me and my dad were thinking would have to be done.. i was just really confused. lol maybe temporarily i can get the black sleeve and later, ill get that guy to put them back together using the stuff he fixed the other thing with..

and he didn't cut it in half.. it was in two pieces when my dad opened it up.

 

[Lightning Struck]

]
yeah thats what me and my dad were thinking would have to be done.. i was just really confused. lol maybe temporarily i can get the black sleeve and later, ill get that guy to put them back together using the stuff he fixed the other thing with..

and he didn't cut it in half.. it was in two pieces when my dad opened it up.

??? ??? ??? ??? strange Trey

 

[94Vert]

its no big deal just get a rubber coupler at autozone or lowes, it doesn't matter if it's in 2 pieces

 

[TxCobrA98]

i know i went and got one.. but i also go another question. how does the filter connnect to the MAF and how does the MAF go to the end of the curvy piece. me and my dad are going to go out and do it now. but i was just wondering in case we get stuck. we may figure it out ourselves.. i just do see how ATM.