10" rear wheels

Orange Stang

Well-Known Member
Joined
Jul 11, 2009
Messages
1,656
Reaction score
2
how many of you are running a 10" wide rear wheel, and what size tire do you recomend?

thanks!
 
OP
OP
Orange Stang

Orange Stang

Well-Known Member
Joined
Jul 11, 2009
Messages
1,656
Reaction score
2
i ended up with some 18" chrome saleens, but the rears are 10" wide and the biggest wheels ive owned is 9". so im new to this....
 

JDwhite98gt

Well-Known Member
Joined
Apr 6, 2008
Messages
1,285
Reaction score
0
Ive got em. Wouldnt run anything smaller than a 285/35/18. I used to have 305/35/18 Nitto drag radials and they were almost perfect on my Saleens. I have 295/30/18's now and wish I would have went larger. But anywhere from a 285-315 would be your best best. Keep in mind though a tire skinnier than a 305 will need a spacer to be flush with the rear quarter.
 

98Viperblue

Well-Known Member
Joined
Oct 7, 2008
Messages
1,051
Reaction score
0
run a 305 and just flip your quad shock.
Or you can get your fender rolled and run a 315
 

Javi

Mythic Level
Joined
Sep 8, 2007
Messages
27,321
Reaction score
57
Location
Th3 405
They will fit fine with the proper tire, i suggest 295/35/18 or if you want to be the coolest kind around the block then get 315s
 

Win

Legend
Joined
Nov 20, 2006
Messages
9,508
Reaction score
17
Location
Kennesaw, Ga
98Viperblue said:
run a 305 and just flip your quad shock.
Or you can get your fender rolled and run a 315

I ran a 315 on a 10.5 on the 17 machined cobra's and didn't even have to flip the quad or roll the fender :)
 

ttocs

Forum's #1 poster
Joined
Oct 9, 2009
Messages
37,641
Reaction score
7,760
Location
Evansville Indiana
I am running 10.5s with 295 rikkens on it now. When I got them they had 335 sumitomo's that would rub occasionally in hard cornering but otherwise were fine for daily use, other then the crappy tire of course...
 

DropTopPony

Post Whore
Joined
Jan 12, 2006
Messages
15,182
Reaction score
223
Location
South Jersey
On my 9.5 rears I have 295's and they are perfect. When I get new wheels next year they will most likely be a 10" rear and will go with a 305 or 315 depending on brand.
You have to see what tire you want and if they run small etc. I remember Nitto always ran smaller then advertised and I would get the next width up with them.
 

Untame-d

Well-Known Member
Joined
Sep 7, 2009
Messages
1,152
Reaction score
0
I have 275 Nitto 555's on my 18" FR500 10's I bought and they are too skinny. They have the ricer look to them. Hense they will be burnt off and then mounted with 305 DR's next year.
 

cantbuytime

Active Member
Joined
Mar 1, 2010
Messages
699
Reaction score
12
Mine are supposed to be 9.5 but are 10". I ran with a 295/30.

IMO- running anything over a 295 is a waste of meat if u dont have some real power.. its just going to slow u down.
 

95opal

Well-Known Member
Joined
Jun 21, 2007
Messages
4,008
Reaction score
3,132
295s anything smaller just dont look right. anything over 315 is stuppid. :BangHead:
 

ttocs

Forum's #1 poster
Joined
Oct 9, 2009
Messages
37,641
Reaction score
7,760
Location
Evansville Indiana
my 285s actually do not look horribly skinny, considering they were put on after I had 335s but that is what came with the wheels from craigslist for $700. Wheels still had the plastic on the center caps and the tires still had the nubs on them so I could not complain.
 

Latest posts

Forum statistics

Threads
78,527
Messages
1,535,652
Members
16,185
Latest member
dmen76

Members online

Top