350hp H/C/I

QCmustang94 · Jan 3, 2010

I want to build my 5.0l up to 350 hp to the flywheel. My budget is 3500$ for everything and I want to buy brand new stuff. So wich H/C/I I should buy?

2002BLGT · Jan 3, 2010

trickflow kit is 2500 give or take a few bucks depending on where you buy it from , that will give you a 1000 to go thru your bottom end which will be a tight budget but can be done if you do alot of the work yourself ?

QCmustang94 · Jan 3, 2010

I live in Canada and for the trickflow kit it's 3000$ taxe in + shipping and handling (duty etc...) 3650$...It's too much.

Win · Jan 3, 2010

Then you better start hoping you get some great deal on parts. Your not going to be able to pull it off with 3500 with New parts.

Find a set of Alum heads probably somewhere around $600 - $1000
Buy the LMR budget Shortblock from. $699
Find a Cobra Upper Lower/GT40 / Tubular GT40 if you can afford it. GT40 will normally run you about $125 (that's the very very common rate over on Corral) There are multiple and i mean multiple for that price.
Cam anywhere from $75 - $125

Realistically be prepared to spend $2000 - $3500 unless you get some good deals on things.

Oh and if you can't find it locally shipping is a Monkey Balls to Canada

QCmustang94 · Jan 3, 2010

Win said:
Oh and if you can't find it locally shipping is a Monkey Balls to Canada

Yes, I saw that :S Could someone tell me where I could buy some new parts from a Canadian shop so I could be able to save money on the shipping.h
At least I want to buy new heads. Cam and Intake can be used.

mikey94gt · Jan 3, 2010

www.racingjunk.com http:// is all I gotta say. you can find all kinds of stuff on there.

LAFENATU · Jan 3, 2010

Find someone you can ship it to here in the US. Have them ship it to you in Canada. I took care of my buddies Mallory setup. He saved just over ~$100 paying for it to be shipped to me and then I shipped it to him for ~$12

Obviously it will cost more to ship the TFS kit but it will be less than ~$1000 I can tell you that.

QCmustang94 · Jan 5, 2010

Wich heads are the best for like 1300$ ishh?
and where I can get the LMR kit for 699?

jthorn9 · Jan 5, 2010

GT-40 X series heads can usually be had for that price or less. I paid $980 for mine 2 years ago and they were fully cleaned and rebuilt. You might get lucky and find a set of Eddelbrock or Trickflow heads for about that price, but I doubt it.

LMR = Late Model Restoration

got5.0 · Jan 5, 2010

Late Model Restoration is a company, so just go to their webzite... just incase you didn't know :icon_rr:

Also, I think you can get some really nice used products out there... I don't see a need to buy very many things new, but its your project. :thumbsup:

mikey94gt · Jan 5, 2010

How about these?

http://www.racingjunk.com/category/1283/Heads/post/1719336/Ford-Trick-Flow-Heads.html

Javi · Jan 5, 2010

mikey94gt said:
How about these?

http://www.racingjunk.com/category/1283/Heads/post/1719336/Ford-Trick-Flow-Heads.html

thats a deal so its this one: http://www.racingjunk.com/category/1283/Heads/post/1760211/AFR-185-HEADS-SBF.html

brad94GT · Jan 5, 2010

try corral.net

Magic · Jan 5, 2010

QCmustang94 said:
Yes, I saw that :S Could someone tell me where I could buy some new parts from a Canadian shop so I could be able to save money on the shipping.h
At least I want to buy new heads. Cam and Intake can be used.

Where in Canada do you live? I will assume Quebec from your user name. There are a bunch of performance shops in Ontario that would be able to sell you parts and what not. I used to work at one in Toronto and I had customers all over Canada (BC, Alberta, Quebec, Nova Scotia, Cape Breton etc).

Magic · Jan 5, 2010

Magic said:
QCmustang94 said:

Yes, I saw that :S Could someone tell me where I could buy some new parts from a Canadian shop so I could be able to save money on the shipping.h
At least I want to buy new heads. Cam and Intake can be used.

Click to expand...

Where in Canada do you live? I will assume Quebec from your user name. There are a bunch of performance shops in Ontario that would be able to sell you parts and what not. I used to work at one in Toronto and I had customers all over Canada (BC, Alberta, Quebec, Nova Scotia, Cape Breton etc).

OR join a local Mustang message board, even a Toronto based one to find some parts and local shops that sponsor the message boards.

QCmustang94 · Jan 6, 2010

[/quote]

Where in Canada do you live?
[/quote]

I live in Gatineau,QC. If you know some speed shop in ottawa tell me because I have my mohawk card and don't pay any taxes.

Magic · Jan 6, 2010

Where in Canada do you live?
[/quote]

I live in Gatineau,QC. If you know some speed shop in ottawa tell me because I have my mohawk card and don't pay any taxes.
[/quote]

There is a Mustang shop in Quebec, Mustang Direct.. http://www.mustangdirect.com/

I dont know of any shops in the Ottawa area to recommend.

predator97svt · Jan 8, 2010

If you save up a little more you could go turbo for about 4500-5K after everything turbo kit, fuel system, tune, and guage, and you would be around 450hp at the crank on only 6-8 psi. Ontop of that there is alot more room to grow AND you dont need to tear you motor apart untill you want to get over 450RWHP (provided you have a good safe tune and dont flog the car on a daily basis)
check out http://bgturbokits.com/storebg/index.php?main_page=index&cPath=1&zenid=d9e8d8656028d9cc1a6b86e988e895c0

QCmustang94 · Jan 15, 2010

I want to refresh the engine before I go SC or turbo. SO how much Hp do you guys think I'll have with gt40 intake, gt40x heads, e303 cam ?

QCmustang94 · Jan 16, 2010

what you guys think about that kit : it's in my price and i will probably be able to put some boost on it after... how much hp with this kit and is it bolt on for my 94 5.0?
link : http://www.latemodelrestoration.com/item/LRS-6049PK