350hp H/C/I

[QCmustang94]

I want to build my 5.0l up to 350 hp to the flywheel. My budget is 3500$ for everything and I want to buy brand new stuff. So wich H/C/I I should buy?

 

[2002BLGT]

trickflow kit is 2500 give or take a few bucks depending on where you buy it from , that will give you a 1000 to go thru your bottom end which will be a tight budget but can be done if you do alot of the work yourself ?

 

[QCmustang94]

I live in Canada and for the trickflow kit it's 3000$ taxe in + shipping and handling (duty etc...) 3650$...It's too much.

 

[Win]

Then you better start hoping you get some great deal on parts. Your not going to be able to pull it off with 3500 with New parts.


Find a set of Alum heads probably somewhere around $600 - $1000
Buy the LMR budget Shortblock from. $699
Find a Cobra Upper Lower/GT40 / Tubular GT40 if you can afford it. GT40 will normally run you about $125 (that's the very very common rate over on Corral) There are multiple and i mean multiple for that price.
Cam anywhere from $75 - $125

Realistically be prepared to spend $2000 - $3500 unless you get some good deals on things.

Oh and if you can't find it locally shipping is a Monkey Balls to Canada

 

[QCmustang94]

Oh and if you can't find it locally shipping is a Monkey Balls to Canada

Yes, I saw that :S Could someone tell me where I could buy some new parts from a Canadian shop so I could be able to save money on the shipping.h
At least I want to buy new heads. Cam and Intake can be used.

 

[mikey94gt]

www.racingjunk.comhttp:// is all I gotta say. you can find all kinds of stuff on there.

 

[LAFENATU]

Find someone you can ship it to here in the US. Have them ship it to you in Canada. I took care of my buddies Mallory setup. He saved just over ~$100 paying for it to be shipped to me and then I shipped it to him for ~$12

Obviously it will cost more to ship the TFS kit but it will be less than ~$1000 I can tell you that.

 

[QCmustang94]

Wich heads are the best for like 1300$ ishh?
and where I can get the LMR kit for 699?

 

[jthorn9]

GT-40 X series heads can usually be had for that price or less. I paid $980 for mine 2 years ago and they were fully cleaned and rebuilt. You might get lucky and find a set of Eddelbrock or Trickflow heads for about that price, but I doubt it.

LMR = Late Model Restoration

 

[got5.0]

Late Model Restoration is a company, so just go to their webzite... just incase you didn't know :icon_rr:

Also, I think you can get some really nice used products out there... I don't see a need to buy very many things new, but its your project. :thumbsup:

 

[mikey94gt]

How about these?

http://www.racingjunk.com/category/1283/Heads/post/1719336/Ford-Trick-Flow-Heads.html

 

[Javi]

How about these?

http://www.racingjunk.com/category/1283/Heads/post/1719336/Ford-Trick-Flow-Heads.html

thats a deal so its this one: http://www.racingjunk.com/category/1283/Heads/post/1760211/AFR-185-HEADS-SBF.html

 

[brad94GT]

try corral.net

 

[Magic]

Yes, I saw that :S Could someone tell me where I could buy some new parts from a Canadian shop so I could be able to save money on the shipping.h
At least I want to buy new heads. Cam and Intake can be used.

Where in Canada do you live? I will assume Quebec from your user name. There are a bunch of performance shops in Ontario that would be able to sell you parts and what not. I used to work at one in Toronto and I had customers all over Canada (BC, Alberta, Quebec, Nova Scotia, Cape Breton etc).

 

[Magic]

Yes, I saw that :S Could someone tell me where I could buy some new parts from a Canadian shop so I could be able to save money on the shipping.h
At least I want to buy new heads. Cam and Intake can be used.

Where in Canada do you live? I will assume Quebec from your user name. There are a bunch of performance shops in Ontario that would be able to sell you parts and what not. I used to work at one in Toronto and I had customers all over Canada (BC, Alberta, Quebec, Nova Scotia, Cape Breton etc).

OR join a local Mustang message board, even a Toronto based one to find some parts and local shops that sponsor the message boards.

 

[QCmustang94]

[/quote]

Where in Canada do you live?
[/quote]

I live in Gatineau,QC. If you know some speed shop in ottawa tell me because I have my mohawk card and don't pay any taxes.

 

[Magic]

Where in Canada do you live?
[/quote]

I live in Gatineau,QC. If you know some speed shop in ottawa tell me because I have my mohawk card and don't pay any taxes.
[/quote]

There is a Mustang shop in Quebec, Mustang Direct.. http://www.mustangdirect.com/

I dont know of any shops in the Ottawa area to recommend.

 

[predator97svt]

If you save up a little more you could go turbo for about 4500-5K after everything turbo kit, fuel system, tune, and guage, and you would be around 450hp at the crank on only 6-8 psi. Ontop of that there is alot more room to grow AND you dont need to tear you motor apart untill you want to get over 450RWHP (provided you have a good safe tune and dont flog the car on a daily basis)
check out http://bgturbokits.com/storebg/index.php?main_page=index&cPath=1&zenid=d9e8d8656028d9cc1a6b86e988e895c0

 

[QCmustang94]

I want to refresh the engine before I go SC or turbo. SO how much Hp do you guys think I'll have with gt40 intake, gt40x heads, e303 cam ?

 

[QCmustang94]

what you guys think about that kit : it's in my price and i will probably be able to put some boost on it after... how much hp with this kit and is it bolt on for my 94 5.0?
link : http://www.latemodelrestoration.com/item/LRS-6049PK